Pages: 1 [2]
Author Topic: help audi TTRS Med9.1 torque intervention ??  (Read 8316 times)
teobolo
Full Member
***

Karma: +24/-6
Offline Offline

Posts: 112


« Reply #15 on: October 23, 2018, 12:52:53 AM »

thanks for your help .

There is a small improvement, but the fuel continues to ignore what is required, as well as the corrections in the  boost request.

According to your last logs you have boost 2.1bar ... if you lower pressure near 1.8 bar i assume you will be fine .You can also raise more the load requests like i  did to test if is even better .
Logged
javigsi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 37


« Reply #16 on: October 23, 2018, 02:43:33 AM »

According to your last logs you have boost 2.1bar ... if you lower pressure near 1.8 bar i assume you will be fine .You can also raise more the load requests like i  did to test if is even better .

I'm going to do these tests as soon as possible.

thanks

Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0s, 0q)