Being the idiot I am a purchased an OpenFlash tablet again for my 2014 abarth after having one for my 2013. Switched to a GTI, but missed the fiat and bought another (a 2014). Bought the openflash tablet again, since it worked well for my 2013 (well the canned tune was not good but I was able to edit and fix with an included XDF). Jokes on me because apparently Shiv Pathak will not send the XDF for 2014+ (even though the page still advertises the feature)  models and I hadn't read up on that before purchasing.


I know this is a longshot, but this tune has some breakup at higher RPMs that I know how to fix (I was able to find an XDF for the 2013 Abarth I owned, shivs tune has an issue where the mixture is over rich at this point and the ECU pulls timing on a long pull. These two combined lead to unsuccessful spark).

I've tried dissembling the file in IDA, but I really am clueless, hours and hours in and I just can't find a single table.

Anywho, I've attached the .ori/bin file. Thanks!

Edit to add: I would consider paying for this.
Edit again to add: Would it help if I included an XDF file for a different calibration/model year? This I believe would be for a 2mb rom where as this one is 4mb though.. I've attached it. Not sure if it helps

Edit again 2: adding links to the bin file since the zipped version caused some issues

Here it is on MediaFire https://www.mediafire.com/file/fqma7ylwr46fmlm/68206706AHA.ori/file

And alternatively OFT has left a submission of the original file here
https://www.openflashtablet.com/wp-content/uploads/ninja-forms/12/free-off-the-shelf-tune-file-request/2020-02-29/

Sorry, being 4mb the forum wouldn't let me attach the bin file.

Here it is on MediaFire https://www.mediafire.com/file/fqma7ylwr46fmlm/68206706AHA.ori/file

And alternatively OFT has left a submission of the original file here
https://www.openflashtablet.com/wp-content/uploads/ninja-forms/12/free-off-the-shelf-tune-file-request/2020-02-29/