Pages: [1]
Author Topic: Copying a map  (Read 4103 times)
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401


« on: February 26, 2012, 11:52:26 AM »

Hi

I have a mate with a PD 115 remapped (AJM engine code) and hes asked me to copy his remapped file from his ECU and flash it onto another one from a AJM engine.

Is there any sort of difficulties in copying a remapped file from one ECU and flashing it onto another?

Ill be using a MPPS clone with V3 of the software.

I take it both ECUs will ahve the same software numbers.

Any issue with immobilisers etc?


Chris
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #1 on: February 27, 2012, 03:23:39 AM »

No issues with Immobs. just copy the map and flash onto the other ECU

I would personally do it on a bench harness though as if you brick the ecu there is little way to recover the ecu unless you desolder the chip. On the bench you have a more controlled enviroment to flash the ecu.

Could you also post the file once you've done it please. I have an AJM which I mapped but would love to see a pro tuned version of the map. I am pretty sure mine is in the tuned section but if not I can post anyway.

Even if the ECU numbers aren't exactly the same as long as the part number of the ECU is the same you'll be fine.
Logged
carsey
Sr. Member
****

Karma: +7/-4
Offline Offline

Posts: 401


« Reply #2 on: February 27, 2012, 12:40:55 PM »

Will see what I can do

Mate has a mapped golf, but it doesnt feel as quick as his mates mapped bora.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)