NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Hi.. Need some help with what memory layout
Pages: [1]
« previous next »
Author Topic: Hi.. Need some help with what memory layout  (Read 3636 times)
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« on: January 14, 2019, 07:59:43 AM »
I have a Audi A4 Avant quattro 1.8ts BEX engine ym2004 made 2003.11. Eu model/swedish

I dont want to unscrew the ecu to see what label it has. Any other way

Someone else must have tuned this engine before.

And if possible... anyone want to share a Stage 1 Tune..

/nmd
Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #1 on: January 14, 2019, 09:07:24 AM »
You wont get ready made flash , Stage 1 should be pretty easy.

You need to take off the ecu cover atleast to see what kind of ECU you have lol. Or hook up VCDS and open the engine control to see model number.
Logged
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« Reply #2 on: January 15, 2019, 12:04:51 AM »
Will try the vcds solution =)
Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« Reply #3 on: January 15, 2019, 06:51:10 AM »
OK VCDS on channel 1 says


   Part No SW: 8E0 909 518 AS    HW: 8E0 909 018 A
   Component: 1.8L R4/5VT     G   0003  
   Coding: 0011711


Know what?
Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
Risky
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 107
« Reply #4 on: January 15, 2019, 02:27:08 PM »
You could've probably already opened it and looked by now... I did do a quick search and couldn't come up with anything... might wanna just crack it open man. Grin
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #5 on: January 15, 2019, 02:53:00 PM »
800BB
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #6 on: January 15, 2019, 03:20:03 PM »
If you dont know memory layout the 1024kb one will read 512 anyway, it will just put blank 512kb after the end, which you would know if you did some reading Smiley
Logged
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« Reply #7 on: January 16, 2019, 01:31:36 AM »
Did that reading...

But because I didn´t find any info on the web about the ecu memory.. I thought that its best to do some writing here...

hmm. second thougt... maybe I crack it open !



Then I need some helping tuning the stuff... only stage 1 or 1.5 tune.   Did a SAAB 8 years ago... but I think alot is different in this audi ECU..
Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« Reply #8 on: January 16, 2019, 04:49:25 AM »
Hi
Chose memory layout bb800 and pushed the button "Full read flash"

and did on on bb400

..and now the car don´t start

Get  P0602 "Control Module programin error/malfunction

WTF.. I did only read the computer!

HELP ASAP  PLZ
Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« Reply #9 on: January 16, 2019, 06:09:11 AM »
Crap if it´s bricked ... but I took a chanced and did a flash with the same memorymap I used when I did a read!

To flash or crap....First time flashing my Audi..  flash took about 5 min ...turn of key waited 20 sec turn on 1 min for tbp and then off again and then on and start....And it did start..  And oboy did I smile =))


Hard way to find the right memorymap...

No what the heck definition file should I use in turnerpro (free)... whats the different in the payed version (RT)?


Did find one. http://nefariousmotorsports.com/forum/index.php?topic=13175.0title=

Hope it works!
Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 02:31:15 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)