Pages: [1]
Author Topic: RLLRUN  (Read 4735 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« on: February 23, 2012, 05:05:33 AM »

Hello!  Smiley
So, I've defined RLLRUN map with which I should be able to disable closed loop operation. Now in my map there's only values of 6.000. So basically what this number resembles? Is it percent of something or factor?
Logged

phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #1 on: February 23, 2012, 09:48:38 AM »

Load
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #2 on: February 23, 2012, 09:58:44 AM »

Load

So is it 6% of load? or actual load just 6??
Logged

technic
Full Member
***

Karma: +18/-5
Offline Offline

Posts: 227


« Reply #3 on: February 23, 2012, 10:40:09 AM »

% of load
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923


« Reply #4 on: February 23, 2012, 11:07:15 AM »

It's RL threshold below which closed loop will not activate.
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #5 on: February 23, 2012, 11:30:30 AM »

It's RL threshold below which closed loop will not activate.

Thank you, now it's clear to me
Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.033 seconds with 17 queries. (Pretty URLs adds 0s, 0q)