Pages: [1]
Author Topic: Topic for short questions  (Read 2431 times)
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« on: March 28, 2019, 11:48:06 AM »

What do you think guys about this topic, one topic for all short easy to answer question.
 So I will start with few questions...
Is it possible to brick ECU while reading flash?
And look this, i read ECU, mod it upload new flash everything is working. But ME7 only read 70 checksums, not 71 as on others ECUs

Is that normal?

Code:
Step #1: Reading ROM info ..
 Searching for EPK signature...OK
 Searching for ECUID table...OK
 EPK         : '40/1/ME7.5/3/4016.31//24G/Dst04o/080802//'
 Part Number : '4B0906018DH '
 Engine ID   : '1.8L R4/5VT    '
 SW Version  : '0004'
 HW Number   : '0261207928'
 SW Number   : '1037366497'

Step #9: Looking for rechecks ..
    <1fc6e>  0x01C000-0x01FFFF Chk: 06232F4D CalcChk: 06232F4D OK (recheck)

*** Found 70 checksums in 018DH.bin

*** DONE! 0 error(s) in 018DH.bin! ***




If you don't like this idea, you can freely erase this topic  Wink
« Last Edit: March 28, 2019, 11:49:37 AM by BlackT » Logged
cessnas
Full Member
***

Karma: +2/-17
Offline Offline

Posts: 77



« Reply #1 on: March 28, 2019, 01:10:56 PM »

Mine also reads 70 checksums with ME7sum. Never had an problem with that
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600


« Reply #2 on: March 28, 2019, 01:15:38 PM »

if me7check shows no errors then its okay
dont count checksums...
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: March 28, 2019, 02:35:21 PM »

Is it possible to brick ECU while reading flash?
Yes. http://nefariousmotorsports.com/forum/index.php?topic=981.0title=
Quote
And look this, i read ECU, mod it upload new flash everything is working. But ME7 only read 70 checksums, not 71 as on others ECUs

Images vary.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)