Hi, I have a problem with the driver ford c-max 2011 r after a collision Hole in the housing and broken cubes. The controller has the number 0261S07194 and I also have a controller with the number 0261S07430 and from what I know it is interchangeable. I read the contents of the TC1767 memory because "flash and eeprom" in this case is sitting in this system. In the case of edc 15.16 and me.7.5, I knew how to make a clon. Here, you probably need to modify the contents of the target driver with the data from the first one, or you think that Ktag, because I have one, simply upload the eeprom file from the first driver in the boot mode to the second one. I am asking for a correction if I'm wrong. In the attachment I send 3 files which I read by katag from each driver. I understand that uploading a file with a weight of 887KB to the new driver in the bootmode bypassing the flash will not pass