NefMoto > Technical > Flashing and Chipping > Found 1 errors!!!
Pages: [1]
« previous next »
Author Topic: Found 1 errors!!!  (Read 4862 times)
vovix
Guest
« on: February 25, 2012, 04:27:35 PM »
I have changed this file in TunerPro (with plugin installed), when I save TunerPro say checksums successfully calculated, but when I try to check with ME7Check it say Found 1 errors. It safe to load in ECU?
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #1 on: February 26, 2012, 03:57:45 AM »
Winols reveals 4 chks errors.
After checksumed it via winols, me7check reveals 1 error again.

C:\>me7check 1ok.bin
======================================================
me7check v1.11 (c) mki, 06/2004-07/2011
Checking file 1ok.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4013.00//24b/Dst02o/210201//
-> Contents of ECUID data table:
   - '0261207436'         (SSECUHN)
   - '1037362287'         (SSECUSN)
   - '06A906032HJ '       (VAG part number)
   - '0002'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'


Data area checksum failure(s) found
-> Found 1 error!!!   *******************************



Dont used it its my opinion.
« Last Edit: February 26, 2012, 04:04:46 AM by professor » Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
vovix
Guest
« Reply #2 on: February 26, 2012, 04:51:51 AM »
then why tunerpro calculate wrong checksums? i have bought licence
and problem is not only with this file.

Quote from: professor on February 26, 2012, 03:57:45 AM
Dont used it its my opinion.
finally i have uploaded to my ECU, car start and work well without faults. Can be that sums are calculated correct but ME7Check show errors?
« Last Edit: February 26, 2012, 05:01:34 AM by vovix » Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409
« Reply #3 on: February 26, 2012, 05:28:20 AM »
Quote from: vovix on February 26, 2012, 04:51:51 AM
finally i have uploaded to my ECU, car start and work well without faults. Can be that sums are calculated correct but ME7Check show errors?
If work then ok.
Dont know
Someone else please confirm it.
Logged
Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
mtx-electronics
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 66


WWW
« Reply #4 on: March 07, 2012, 02:30:09 AM »
Please report any problems with the plugin by email, I do not have the time to follow the forum regularly and might not see you plea for help. I can not solve problems that I am not aware off Smiley

Make sure you send me:

- OS Version & if 32bit or 64bit
- Tunerpro version
- Plugin version
- Stock bin file
- Modified bin file

Common problems:
- Don't forget the stock file used on ME7-2002 must be really stock.
- The plugin will not work on files that have been compressed or encrypted.
Logged
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350
« Reply #5 on: March 15, 2012, 08:01:11 AM »
Checksum check ain't complaining :
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 01:33:09 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)