Pages: [1]
Author Topic: Quick question KFZW axis  (Read 4357 times)
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« on: March 16, 2012, 10:39:05 AM »

As above really, just want to check as I know one axis is RPM but the other is %, whats that in relation to? ie whats the % of
« Last Edit: March 16, 2012, 10:47:51 AM by littco » Logged
phila_dot
Hero Member
*****

Karma: +172/-11
Offline Offline

Posts: 1709


« Reply #1 on: March 16, 2012, 11:18:35 AM »

Load
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #2 on: March 16, 2012, 11:40:07 AM »

Excellent it what I thought.

Next question is I have a remap the % load axis on the kfzw is stock while the kfmirl is increased quite a bit with a max ldrxn and kfmirl value well above this % load on the axis ( max value on axis is 185 whilst highest ldrxn/kfmirl is over 200. Will this mean the timing at values above the max load axis just follow the highest axis and is this a bad ?
Logged
phila_dot
Hero Member
*****

Karma: +172/-11
Offline Offline

Posts: 1709


« Reply #3 on: March 17, 2012, 10:24:55 PM »

Yes, timing will follow the last column when load meets or exceeds the highest axis value.

It isn't necessarily a problem depending on how much the difference is. Ignition angle must move towards late with increasing load, so if you are having problems with KR when actual load exceeds your axis then you may have to rescale it.

I can't tell you off the top of my head if this axis is shared with anything else.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0s, 0q)