4b0920933g d11 request petrol

Pages: [1]

« previous next »

Author

Topic: 4b0920933g d11 request petrol (Read 8523 times)

Stoti

Full Member

Karma: +0/-0
Offline

Offline

Posts: 79

	4b0920933g d11 request petrol « on: October 28, 2019, 12:43:53 PM »

Hello. I m searching 4b0920933g d11 dump for petrol 4 cyl engine. I attach 1.9 tdi dump from that one i have its obd read .


« Last Edit: November 04, 2019, 11:19:06 AM by Stoti »	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: 4b0920933g d11 request petrol « Reply #1 on: October 29, 2019, 03:21:17 PM »

933G was only diesel - you want to rescale it for petrol?


	Logged

Stoti

Full Member

Karma: +0/-0
Offline

Offline

Posts: 79

	Re: 4b0920933g d11 request petrol « Reply #2 on: October 30, 2019, 10:29:33 AM »

Yes. Can you point me what revision to search . I put jaeger tachometer plate or if u can point me what addres is located rpm calibration. Thanks.


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: 4b0920933g d11 request petrol « Reply #3 on: October 30, 2019, 02:59:50 PM »

test this one


	Logged

Stoti

Full Member

Karma: +0/-0
Offline

Offline

Posts: 79

	Re: 4b0920933g d11 request petrol « Reply #4 on: November 01, 2019, 01:35:05 AM »

Works like a charm. Thank you very much i appreciate it . Ignore warning lights i dont have bulb failure detect on my car . Thank you again.


« Last Edit: November 04, 2019, 11:21:41 AM by Stoti »	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: 4b0920933g d11 request petrol « Reply #5 on: November 01, 2019, 07:37:37 AM »

Connect pin 14 , 15 , 16 of grey connector to ground - no fault on cluster from lights and washer fluid level Wink


	Logged

Stoti

Full Member

Karma: +0/-0
Offline

Offline

Posts: 79

	Re: 4b0920933g d11 request petrol « Reply #6 on: November 01, 2019, 01:00:42 PM »

I will try it tomorow its verry annoing . Thank you again .

Edit: works great I


« Last Edit: November 04, 2019, 11:17:11 AM by Stoti »	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: 4b0920933g d11 request petrol « Reply #7 on: November 04, 2019, 11:25:38 AM »

I did a lot of clusters swaps from jeager to fullfis VDO Wink


	Logged

Stoti

Full Member

Karma: +0/-0
Offline

Offline

Posts: 79

	Re: 4b0920933g d11 request petrol « Reply #8 on: November 04, 2019, 12:03:59 PM »

Sure u know how to do it perfect. I put this one only to control RNS-E because i dont have CAN bus on grey connector u put 5 and 6 pin can hi and can low and enable infotaitment in adaptation nex will be adding arduino and fis control to see boost instead external gauge . Hope i help other people in future like u . Thank you .


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 04:00:29 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search