copy and paste



EGT

If you want to remove your EGT sensors:[20] Note that my old M-box xdf is wrong[21] for CDATR/ATS. Please use these offsets.

    CDATR (0x18196) - Configuration byte diagnosis exhaust gas temperature regulation
    CDATS (0x18197) - Configuration byte diagnosis exhaust gas temperature sensor
    CLAATR - Error class exhaust gas temperature regulation
    CLAATR2 - Error class exhaust gas temperature regulation bank 2
    CLAATS - Error class exhaust gas temperature sensor
    CLAATS2 - Error class exhaust gas temperature sensor bank 2

There is anecdotal evidence[22] that this will not allow you to completely remove the EGT sensors; keeping dead ones connected might be necessary.

Setting both of these to their maximum (1229) may help: [23]

    TABGSS (0x1C514) and TABGSS2 (0x1C516) - Desired exhaust gas temperature for EGT regulation