NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Need help to find Maps/values 8E0909518AS
Pages: [1]
« previous next »
Author Topic: Need help to find Maps/values 8E0909518AS  (Read 2709 times)
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« on: January 14, 2020, 11:56:07 AM »
Hallo

I have collected an xdf files for Tuner Pro for the 8E0909518AS. But it hard to find and it´s  not complete. So I have also tested out the 518AK xdf files (a few) because they should be about the the same US (518AK) or EU (519AS) model but from some of them i get strange values on some parameter. So I wounder i someone will help me find the following maps. What is correct/wrong. I have no clue how to find these maps and would like a lesson in finding em. Im about to do a SAI delete, rear 02 delete and left foot braking. And in the future it will be decat and bigger, turbo and injectors. The mechanic stuff is easier.
And please.. be nice!


Parameter   518AS.xdf adr-hex         518AK.xdf adr-hex
MSLUB        0x1BA16                      0x1B7CA
MSLBAS      ????                            0x1837D
ESKONF      ????                            0x10ED1 (get two config rows in one of the xdf-files??)
VMAX         ????                            0x1E2CE


Here is the org ecu file. But i have a stg1+ for the ecu where i will do all the changes!


/nmd
Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425
« Reply #1 on: January 14, 2020, 12:48:13 PM »
take a look at this
https://www.youtube.com/watch?v=0dkuoFh2foQ&t=1s

https://www.youtube.com/watch?v=nKSe1fPbTlA&t=3s

And here is for AH i made (your is BEX to right? )
Logged
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« Reply #2 on: January 14, 2020, 02:44:24 PM »
I will check those videos

Yepp mine is a BEX!
« Last Edit: January 14, 2020, 03:01:08 PM by nmd » Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
nmd
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 28
« Reply #3 on: January 15, 2020, 06:31:56 AM »
Looked at your file and did not find the MSLBAS parmeter in the XDF file. But compared it to a 518AK file where the adress was 0x1837D and found in 518AS that it had the same adress and the same value of 3f. I added a screenshot of the bins compared!

Think that was an easy one. 


But when i add it in Tuner Pro i get a few options and my guess is I should choose "scalar" because you only want the value in that spot.

Now i must learn all the other parametes Flag/switch, table, function and patch.
« Last Edit: January 15, 2020, 06:46:58 AM by nmd » Logged
------------------------------------------------------
Audi A4 Avant Quattro 1.8ts -04
Audi A3 1.6 -06
Ford Mustang 5.0L -88

And some motorcycles/dirt bikes!
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425
« Reply #4 on: January 15, 2020, 06:45:27 AM »
oh my bed, I didn't post my last version
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 06:48:04 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)