Pages: [1]
Author Topic: Adding or editing axis  (Read 2549 times)
atdub
Full Member
***

Karma: +4/-3
Offline Offline

Posts: 144


« on: February 23, 2020, 01:10:32 PM »

Never had to do this before but does someone have a link or can point me in the direction of how to add or edit an axis? For example if im trying to change a value for 7000 rpms but the units only go to 6000 how would I go about adding a row for 7000?

using win0ls if that matters.
Logged
fknbrkn
Hero Member
*****

Karma: +185/-21
Online Online

Posts: 1440


mk4 1.8T AUM


« Reply #1 on: February 23, 2020, 04:00:27 PM »

Point mouse pointer to an axis value
Click it
Change to whatever you want

You cannot add new rows or columns
Logged
atdub
Full Member
***

Karma: +4/-3
Offline Offline

Posts: 144


« Reply #2 on: February 23, 2020, 04:56:31 PM »

Point mouse pointer to an axis value
Click it
Change to whatever you want

You cannot add new rows or columns

Now would that actually be effective within the ecu if changed and flashed or am I just "Pointing my mouse pointer and changing it to whatever"? meaning that value will still be for 6000 in the ecu but I just labeled it 7000 on winOLS??
Logged
michelhadid
Jr. Member
**

Karma: +10/-2
Offline Offline

Posts: 41


« Reply #3 on: February 23, 2020, 08:04:08 PM »

Rescale, the axis values, change 6000 to 7000, etc. Not hard, just be sure yo have the right offset/factor
Logged
atdub
Full Member
***

Karma: +4/-3
Offline Offline

Posts: 144


« Reply #4 on: February 23, 2020, 08:20:21 PM »

Thanks guys.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)