I wanted to remove SAI from my 2003's A3 8L 1.8T AUM
Can anyone tell me If I done it right or wrong?

- Zeroed MSLUB, MSLBAS
- disabled circuit diagnosis in ESKONF by set SLV (N112) and SLP (J299) to 11.
- in CWKONABG changed 05 to 01 (not to 00 as mentioned on s4wiki - why? see below)

In BOSCH documentation (for Audi R4-5V 132kW found on forum) found that



As I could see in this pic bit 2 is B_slsfz
After that found this:



1 means SLS(Secondary Air Control) installed So I decided to put 0 on bit 2
CWKONABG  05(hex) = 101(bin) so 001(bin) = 01(hex)

Please let me know, if i done it right. (Right addresses)
Also Please check my cheksums which I corrected by me7sum.

Including 3 files
Stock
Atfer mods
After mods with corrected checksums. - Can I flash this?