Pages: [1]
Author Topic: Me7 ecu pins  (Read 2314 times)
Slowgti
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« on: July 05, 2020, 02:09:33 PM »

Does anyone have an amp or te part number for the small ecu harness pins? I found some data sheets for the connectors, but I couldn’t find a pin in the catalog that matched the hand full of pins I have.

Thank you!
Logged
justinvw2646
Full Member
***

Karma: +17/-3
Offline Offline

Posts: 192


« Reply #1 on: July 09, 2020, 03:49:50 PM »

With the part number on the connector housing you can call any dealer and get the terminal end part numbers.....make sure you know what wire diameter you need (most of them are .5mm) but sometimes a connector like that will have multiple wire diameters with the same ends. If that makes sense.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #2 on: July 09, 2020, 03:59:15 PM »

should be jpt 2.8 , or something along those lines.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)