Pages: [1]
Author Topic: 2.7BiT KRKTE for 440cc injectors  (Read 5630 times)
idzioch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« on: January 03, 2017, 04:13:15 PM »

Hi!

What is the proper value of KRKTE for bosch green 440cc injectors?

S4 have 4bar fuel pressure regulator...

440cc@3bar ~ 508cc@4bar Huh

...from s4 wiki - 34.125 / 508 = 0,067

Amiright? Smiley

Any others maps need to change for first start on new injectors?

Logged
lepatron972
Full Member
***

Karma: +3/-17
Offline Offline

Posts: 92



« Reply #1 on: January 04, 2017, 05:34:10 AM »

TVUB
Logged

lepatron972
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556


« Reply #2 on: January 04, 2017, 12:51:43 PM »

TVUB

8,          10,        12,         14,        16V

2.0989   1.3202   0.9174   0.6694   0.4987
Logged
idzioch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #3 on: January 23, 2017, 02:28:19 PM »

THX!

How to check that everything is ok now?
Observe STFT & LTFT or use a wideband sensor?

EGT is now lower on high gears...

Logged
roman_tyk
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 87


« Reply #4 on: July 27, 2020, 12:09:57 PM »

@idzioch did you successfully tune car using this krtkte and TVUB?
Logged
jdm
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #5 on: July 28, 2020, 03:06:39 AM »

Cant comment on the history or proposed TVUB above, but having run Bosch Green 440cc (0 280 155 968) on 2.7t at 4bar, I can offer some suggested values to get you started.

They are a great injector, but notoriously non linear. FKKVS will absolutely need some work, particularly in low rpm/pulse width areas.

Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12271


WWW
« Reply #6 on: July 28, 2020, 05:15:44 PM »

They're also terribly undersized for anything but stock K03s, in case it wasn't obvious.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0s, 0q)