NefMoto > Technical > Tuning > ESKONF on me7.1.1 4d0907559e
Pages: [1]
« previous next »
Author Topic: ESKONF on me7.1.1 4d0907559e  (Read 5966 times)
a4erik
Newbie
*

Karma: +3/-0
Offline Offline

Posts: 5
« on: January 04, 2018, 02:32:47 PM »
I'm using the 559e 4.2 S6 file and attempting to figure out ESKONF. Trying to disable circuit diagnosis for emissions & rear o2 but have been unable to find specific info on the v8 me7.1.1 ESKONF. I plan to guess & check with multiple flashings, but does anyone have info to help fast-track that?

Starting at 10B9C, here is what I have for the 13 bit pairs:

00 - 00 00 00 00
30 - 00 11 00 00
BF - 10 11 11 11
FC - 11 11 11 00    probably xx xx xx J299
00 - 00 00 00 00    A6 560ce has N112 as #2
03 - 00 00 00 11
C3 - 11 00 00 11
FF - 11 11 11 11
AA - 10 10 10 10
FA - 11 11 10 10
FA - 11 11 10 10
FF - 11 11 11 11
CC - 11 00 11 00
Logged
a4erik
Newbie
*

Karma: +3/-0
Offline Offline

Posts: 5
« Reply #1 on: April 24, 2018, 04:23:52 PM »
Finally figured this out with trial and error testing.... I spent an afternoon with everything unplugged from my engine harness and slowly worked through flashing and checking DTC's for what each bit pair controls. Successfully passed Georgia emission from this table.

Motor is a 4.2 40v BFM from a D3 A8, ECU is 4D0907560CE with the 4D0907559E flash. Several other posts suggest all ME7.1.1 is all very similar, so hopefully this helps someone else.
« Last Edit: April 26, 2018, 04:56:14 PM by a4erik » Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420
« Reply #2 on: October 22, 2019, 06:48:54 AM »
Quote from: a4erik on April 24, 2018, 04:23:52 PM
Finally figured this out with trial and error testing.... I spent an afternoon with everything unplugged from my engine harness and slowly worked through flashing and checking DTC's for what each bit pair controls. Successfully passed Georgia emission from this table.

Motor is a 4.2 40v BFM from a D3 A8, ECU is 4D0907560CE with the 4D0907559E flash. Several other posts suggest all ME7.1.1 is all very similar, so hopefully this helps someone else.

This was very helpful. i was chasing the idea of doing this but none of what was written so far was for 7.1.1 Thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #3 on: October 22, 2019, 08:29:56 AM »
Quote from: a4erik on April 24, 2018, 04:23:52 PM
Finally figured this out with trial and error testing.... I spent an afternoon with everything unplugged from my engine harness and slowly worked through flashing and checking DTC's for what each bit pair controls. Successfully passed Georgia emission from this table.

Well done.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
mdccode5150
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 122
« Reply #4 on: October 11, 2020, 08:54:32 PM »
Here's some more ME7.1 and ME7.1.1 VR8 4.0L W8 ESKOF:
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 12:33:37 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)