NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > 1.8T APY/BAM EGT delete
Pages: [1]
« previous next »
Author Topic: 1.8T APY/BAM EGT delete  (Read 6131 times)
IAmAnEngineer
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 15
« on: October 07, 2020, 05:52:04 AM »
Hi,
a friend switched his 512kb APY Me7 to a 1024kb BAM Me7 with wideband lambda, because of a BAT.
Everything working fine so far after removing VVT etc. in the software.

EGT is removed by
CDATR
CDATS
CATR
= 0

But when looking in block 112 with VCDS, the ecu still corrects the injection by the (non-existing) EGT sensor, the engine is running way too fat (idle lambda 0.75).
Target Lambda in Block 31 is way down to 0.60.
Offsets are 100% correct, injectors and maf are stock for "running-in" the engine.

Everyone had such a weird behavior?
Maybe some wiring fault?
« Last Edit: October 07, 2020, 06:02:29 AM by IAmAnEngineer » Logged
_nameless
Hero Member
*****

Karma: +374/-3442
Offline Offline

Posts: 3008
« Reply #1 on: October 07, 2020, 10:46:50 AM »
Quote from: IAmAnEngineer on October 07, 2020, 05:52:04 AM
Hi,
a friend switched his 512kb APY Me7 to a 1024kb BAM Me7 with wideband lambda, because of a BAT.
Everything working fine so far after removing VVT etc. in the software.

EGT is removed by
CDATR
CDATS
CATR
= 0

But when looking in block 112 with VCDS, the ecu still corrects the injection by the (non-existing) EGT sensor, the engine is running way too fat (idle lambda 0.75).
Target Lambda in Block 31 is way down to 0.60.
Offsets are 100% correct, injectors and maf are stock for "running-in" the engine.

Everyone had such a weird behavior?
Maybe some wiring fault?
Unpopular option:
Use a 180 wideband tune and port your calibrations
Logged
If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
BlackT
Hero Member
*****

Karma: +82/-48
Offline Offline

Posts: 1535
« Reply #2 on: October 07, 2020, 12:03:14 PM »
TABGBTS set it to 1229
Logged
xXxCryxXx
Full Member
***

Karma: +4/-23
Offline Offline

Posts: 157
« Reply #3 on: October 07, 2020, 12:22:36 PM »
Quote from: BlackT on October 07, 2020, 12:03:14 PM
TABGBTS set it to 1229
Temperatur Abgas Bauteileschutz right
Logged
BlackT
Hero Member
*****

Karma: +82/-48
Offline Offline

Posts: 1535
« Reply #4 on: October 07, 2020, 12:42:52 PM »
Or TABGSS
I am not sure, will look tomorow to confirm
Logged
prj
Hero Member
*****

Karma: +1110/-531
Offline Offline

Posts: 6196
« Reply #5 on: October 07, 2020, 12:49:35 PM »
Learn to log, and you will have the answer.

But most likely the offsets are wrong, or you messed up something else.
If those 3 codewords are done, then ATR has no effect on fuel.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
IAmAnEngineer
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 15
« Reply #6 on: October 16, 2020, 07:47:07 AM »
@BlackT: Thanks! After modifying TABGBTS too everything worked as it should! Smiley

@prj: I know, I always disabled it the same way and it worked fine, offsets are 100% correct, file in attachment.  Huh
Logged
dream
Full Member
***

Karma: +4/-9
Offline Offline

Posts: 93
« Reply #7 on: October 17, 2020, 03:37:34 PM »
Have done the same switch from APY K box to BAM H box and coded out the EGT as founded on the forum here and never had any issues.

Altough shifting up TABGBTS 1229 doesn't sound like a great idea, cause it will be harder to reach the treshold.
« Last Edit: October 17, 2020, 03:39:26 PM by dream » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • June 23, 2026, 12:31:06 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 15 queries. (Pretty URLs adds 0s, 0q)