Pages: [1]
Author Topic: Full Fis Replacement  (Read 2939 times)
meandyoujane
Newbie
*

Karma: +2/-2
Offline Offline

Posts: 12


« on: November 14, 2020, 07:25:14 AM »

recently I have changed my full fis in my golf, much easier than I thought.
The main tips I can say are, ensue you disconnect the battery and heat up the ribbon so that no tracks are pulled up when removing.
Use good quality flux and then the solder flows and do the same to the new lcd, then place very carefully solder it on.
I bought a cheap 7gbp one off ebay


Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 18 queries. (Pretty URLs adds 0s, 0q)