NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > 24V VR6 BDF swap, auto to manual coding on ECU
Pages: [1]
« previous next »
Author Topic: 24V VR6 BDF swap, auto to manual coding on ECU  (Read 2524 times)
canozd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« on: November 17, 2020, 08:05:53 PM »
Hi everyone,

I'm in the process of swapping a 24v VR6 BDF engine on my 2002 1.8T manual New Beetle. All parts/supplies I got for this swap is from a 2002 Jetta GLX 24V. As some of you may know, GLX VR6's are automatic which means my ecu is also programmed auto (and the wiring is different and missing a couple plug here an there but I already modified the harness to be exactly the same pinout as a manual harness).

Basically, I'm looking for any input on if its possible to flash the ecu that came from the Auto Jetta to flash a file from a manual car. Any help is appreciated

The ecu I have right now is Motronic Me7.1.1, 022 906 032 BL.

Thanks!
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #1 on: November 17, 2020, 09:17:21 PM »
Quote from: canozd on November 17, 2020, 08:05:53 PM
Hi everyone,

I'm in the process of swapping a 24v VR6 BDF engine on my 2002 1.8T manual New Beetle. All parts/supplies I got for this swap is from a 2002 Jetta GLX 24V. As some of you may know, GLX VR6's are automatic which means my ecu is also programmed auto (and the wiring is different and missing a couple plug here an there but I already modified the harness to be exactly the same pinout as a manual harness).

Basically, I'm looking for any input on if its possible to flash the ecu that came from the Auto Jetta to flash a file from a manual car. Any help is appreciated

The ecu I have right now is Motronic Me7.1.1, 022 906 032 BL.

Thanks!
just flash a manual file from the same year. you may still need to change softcoding too but thats about it as long as you have it wired correctly
Logged
Giving your mom a tuneup
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
« Reply #2 on: November 18, 2020, 02:31:26 AM »
022906032BM for 6-gear MT is compliant with 032BL software.
After reflash softcoding must be changed from 00033 to 00032.
Logged
canozd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #3 on: November 19, 2020, 01:15:41 AM »
Thanks a lot for the reply! Like I mentioned above, I'm pretty new to this and my current plan is to just use Nefmoto flasher to flash the ecu while its installed on the car.

So I am in search of a 022906032BM bin file as per Marty's recommendation. Once I know I can flash, I want to learn/explore more and play with the bin file later.

Also I will be using a 6speed MT on the car, so in that case I think I won't need to change soft coding after flashing, right?

Thanks!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 11:22:26 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)