NefMoto > Technical > Tuning > Gear ratio transfer on dq250 dsg mapfiles
Pages: [1]
« previous next »
Author Topic: Gear ratio transfer on dq250 dsg mapfiles  (Read 6888 times)
andyc1234
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20
« on: July 17, 2021, 08:18:37 AM »
Hi hoping someone can help me out here. I need the gear tooth count data transferring from a later 0d9 mapfile and transferring into an earlier cxx 02e mapfile. Is that something that can be done. I have managed to pull the file from the earlier tcu that needs editing but can't read the later one at this minute in time.
Logged
andyc1234
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20
« Reply #1 on: July 17, 2021, 09:31:46 AM »
I have posted my old mech mapfile but struggling to get the the mapfile from the newer one. But yes exact problem that you mention. I have the vcds readout from the newer one if that helps or if anyone has the original file to pull data from
Logged
andyc1234
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20
« Reply #2 on: July 17, 2021, 09:44:03 AM »
Yes I know this. Im struggling to read the 0d9 mech but if doing the ratio change is something someone could do then that would be fantastic. All I have of the 0d9 at the minute is this vcds readout. I'm trying to find an original  file or read the tcu but kess v2 isn't reading it.
Logged
andyc1234
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20
« Reply #3 on: July 17, 2021, 11:03:22 AM »
I can hopefully get the mapfile for you in a couple of days. Or the data numbers you require.  I will update soon thanks for your help so far much appreciated
Logged
andyc1234
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20
« Reply #4 on: July 24, 2021, 07:47:55 AM »
Hi sorry its been a while not had access to my stuff. Dq250-6a mqb h53 4504
Is that the code you require?
Logged
andyc1234
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20
« Reply #5 on: July 24, 2021, 10:14:33 AM »
Sorry if I'm being stupid here. This is what I get on vcds
Logged
andyc1234
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20
« Reply #6 on: July 24, 2021, 12:25:52 PM »
Think I get it now software number would be 0d9300012e 4504
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • July 03, 2026, 04:17:33 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 2.323 seconds with 16 queries. (Pretty URLs adds 0s, 0q)