Pages: [1]
Author Topic: Disable dtc  (Read 3301 times)
Bora2020
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 4


« on: April 24, 2021, 10:21:04 AM »

Good evening all

Can someone assist me with how to remove dtcs from a me7.5 ecu. I am trying to remove the codes associated with second lambda sensor which has been removed.
I am using tuner pro with the attached bin and xdf file for 06A906032HN 0002.
 I will also be looking to do Sai delete on this ecu so any pointers on that will be appreciated too.

Many thanks
 Bora2020
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: April 24, 2021, 10:53:52 AM »

Did you read any of the s4wiki before posting?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Bora2020
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 4


« Reply #2 on: April 24, 2021, 03:40:05 PM »

Hi nyet
I have started reading through it. I am new to the 1.8t engines so it is a lot of information to take in. I have also been searching through this forum as there are alot of useful topics.
I have previously just played with the PD engines.
I believe i need to alter these two values CDKAT - CWDLSAHK, and possibly another.
Logged
Bora2020
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 4


« Reply #3 on: April 25, 2021, 04:34:17 AM »

Would changing CLAHSH, CLAHSHE remove the dtcs?
To turn off rear o2 would it be CDKAT, CDHSHE &CDHSH?
Thanks for any help.
Bora2020
« Last Edit: April 25, 2021, 04:43:46 AM by Bora2020 » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.035 seconds with 18 queries. (Pretty URLs adds 0s, 0q)