http://nefariousmotorsports.com/forum/index.php?topic=615.0

"phila_dot
   
Re: Emissions delete and setting actual readiness
« Reply #5 on: July 09, 2011, 03:45:34 PM »
   VCDS displays "Passed" for all readiness checks. See below for secondary O2 changes in my file.

All set to zero:
CLAHSH
CLAHSH2
CLAHSHE
CLAHSHE2
CLALSH
CLALSH2
CDHSH
CDHSHE
CDKAT
CDLASH
CDLSH
CDLSHV
CWDLSAHK

After flashing these changes, I ran the readiness checks for the O2 sensors per the Ross tech wiki.
http://wiki.ross-tech.com/wiki/index.php/Readiness_-_APB_Engine_Code "

Think that might do it....?


EDIT
Nope, missed this, from s4wiki Rear O2 ESKONF. https://s4wiki.com/wiki/Tuning
ESKONF[5] HSH2 (0x10C7A) - set to 0xC0 (set bits 6 and 7)
ESKONF[6] HSH (0x10C7B) - set from 0xF3 to 0xFF (M-box) (set bits 2 and 3)
ESKONF[6] HSH (0x10C7B) - set to 0xC3 to 0xCF (L-box) (set bits 2 and 3)

And CDLATV  to zero if 02s not setting readiness Reply #107 trichard3000 http://nefariousmotorsports.com/forum/index.php?topic=615.105


& of course Check Checksums:
http://nefariousmotorsports.com/forum/index.php?topic=5872.0

If someone could check my working, I'd be greatly appreciative.

Original bin from https://files.s4wiki.com/stock/

edited ESKONF in HxD

Zeroed:
CLAHSH
CLAHSH2
CLAHSHE
CLAHSHE2
CLALSH
CLALSH2
CDHSH
CDHSHE
CDKAT
CDLASH
CDLSH
CDLSHV
CWDLSAHK

in Tunerpro.

Corrected Checksums the `short way (by ddillenger)` http://nefariousmotorsports.com/forum/index.php?topic=5872.0



-----
edit
Well seemed to flash ok to ecu, shall try in car tomorrow.