torixon
Newbie
Karma: +0/-0
 Offline
Posts: 12
|
 |
« on: January 26, 2018, 04:03:49 PM »
|
|
|
Hello All,
my friend has flashed his Audi TT 2006 R32 with galletto via OBD.
It's ME7.1.1. After flashing, the ecu doesn't respond anymore. Then, he have read the ECU in boot mode, and the Flash is not touched (matches with the original via obd), and he got eeprom file.
The OBD tester doesn't communicate, the fans are starting, no check-engine lamp.
I think we have to repair eeprom.
I have tried to generate immo-off file but it didn't work.
May we ask you for help?
022906032GP
0261201450
384450
|
|
|
|
« Last Edit: January 26, 2018, 04:05:48 PM by torixon »
|
Logged
|
|
|
|
brayson
Newbie
Karma: +1/-0
Offline
Posts: 8
|
|
« Reply #1 on: January 26, 2018, 04:49:33 PM »
|
|
|
Is this the file read from the 95040?
Thank you.
|
|
|
|
|
Logged
|
|
|
|
torixon
Newbie
Karma: +0/-0
Offline
Posts: 12
|
|
« Reply #2 on: January 27, 2018, 02:35:34 AM »
|
|
|
This is eeprom file from ECU.
I think 95160
Please find attached flash+eeprom
|
|
|
|
|
Logged
|
|
|
|
brayson
Newbie
Karma: +1/-0
Offline
Posts: 8
|
|
« Reply #3 on: January 27, 2018, 03:22:44 PM »
|
|
|
Its strange where the checksum area is on your immo read thats all.
When i do 7.1 i do the 95040 chip
i have attached 2 edits of your immo file with amendments and included one of my own from a 95040 read so you can see the difference.
Thank you.
|
|
|
|
|
Logged
|
|
|
|
torixon
Newbie
Karma: +0/-0
Offline
Posts: 12
|
|
« Reply #4 on: January 27, 2018, 03:29:19 PM »
|
|
|
Now we have put the different eeprom file found on the digital-kaos, the ECU is alive.
I have disabled immo and it runs fine.
Summary:
Flashing via OBD brickes ECU. Flash is not touched. Eeprom locks the ECU.
After several starts, I get 001537 - P0602 fault code. The engine doesn't turn, fault code don't want to be erased.
Any suggestions?
|
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #5 on: January 28, 2018, 04:45:36 AM »
|
|
|
Boot mode flash? I had probems with kess on a mk5 r32 port flash after that i do them all on the bench
|
|
|
|
|
Logged
|
Giving your mom a tuneup
|
|
|
torixon
Newbie
Karma: +0/-0
Offline
Posts: 12
|
|
« Reply #6 on: January 28, 2018, 08:04:32 AM »
|
|
|
After several engine on/off, the P0602 is on the dash and engine ecu is locked.
Then after writing the same file (eeprom immo off from another car), the ecu is OK for several time.
I definitely need virgin eeprom file or 100% working eeprom for this car. It is not a deal with flash.
|
|
|
|
|
Logged
|
|
|
|
torixon
Newbie
Karma: +0/-0
Offline
Posts: 12
|
|
« Reply #7 on: January 28, 2018, 09:35:24 AM »
|
|
|
Some good guy told me, I have to update the ECU with the sgo file.
The sgo file didn't help. I definitely need to have original eeprom repaired. Can someone repair it?
|
|
|
|
« Last Edit: January 28, 2018, 02:16:55 PM by torixon »
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #8 on: January 28, 2018, 08:20:57 PM »
|
|
|
this should work
|
|
|
|
|
Logged
|
Giving your mom a tuneup
|
|
|
torixon
Newbie
Karma: +0/-0
Offline
Posts: 12
|
|
« Reply #9 on: January 29, 2018, 07:49:51 AM »
|
|
|
Hello Marty, thank you for the file. the car starts, but it says 2.0 petrol engine  no mather. It would be fine if works but I suppose it will lock after 100-200km like before. I have already tried with immo-off another eprom and it worked fine for 100-200km i would really like to restore the original eeprom file |
|
|
|
|
Logged
|
|
|
|
nbdiy
Full Member
Karma: +2/-1
Offline
Posts: 54
|
|
« Reply #10 on: February 01, 2018, 01:17:51 AM »
|
|
|
I had this problem similar in past, with mk5 r32.
This was related to winols making wrong checksums on this car, if I right remember (but this was on old version).
Writing ori once aggain in boot back, putting ecu on car, resetting adaption and error delete and car was fine.
Without resetting adaption and the error delete I had no sucess
|
|
|
|
|
Logged
|
|
|
|
torixon
Newbie
Karma: +0/-0
Offline
Posts: 12
|
|
« Reply #11 on: February 02, 2018, 08:21:46 AM »
|
|
|
This happens with original file, also to the new ecu.
Adaptation done, no fault codes.
And fail again
|
|
|
|
|
Logged
|
|
|
|
roxter
Newbie
Karma: +0/-0
Offline
Posts: 2
|
|
« Reply #12 on: June 08, 2021, 08:35:38 AM »
|
|
|
Hello.
I have the same problem, when I try to fill in the flash, the eeprom was erased.
do you have the original eeprom 022906032GP or 022906032HJ?
|
|
|
|
|
Logged
|
|
|
|
roxter
Newbie
Karma: +0/-0
Offline
Posts: 2
|
|
« Reply #13 on: June 08, 2021, 01:09:26 PM »
|
|
|
wow i found original eeprom R32 BUB AUDI TT (Golf V R32)
95160
022906032HJ
I think it will be useful to many
|
|
|
|
« Last Edit: June 08, 2021, 01:12:43 PM by roxter »
|
Logged
|
|
|
|
|
