Difference between CAN bus for RNS-D and RNS-E

Pages: [1]

« previous next »

Author

Topic: Difference between CAN bus for RNS-D and RNS-E (Read 5955 times)

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Difference between CAN bus for RNS-D and RNS-E « on: March 26, 2021, 11:16:48 AM »

What is difference between CAN-BUS communication for RNS-D, and RND-E
RNS D use TMC tuner to convert CAN-BUS signal from cluster to RNS-D. In elsa that signal is labeled as CAN-BUS(BOSCH)

RNS-E is connected directly to navigation CAN-BUS in cluster


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: Difference between CAN bus for RNS-D and RNS-E « Reply #1 on: March 28, 2021, 03:34:49 AM »

I checked with osciloscope signal before(RNS-D send) and after TMC tuner.(schould be same signal that RNS-E use)
Far as I can see these are both 100 kbs, and ISO 11898-3


	Logged

Stoti

Full Member

Karma: +0/-0
Offline

Offline

Posts: 79

	Re: Difference between CAN bus for RNS-D and RNS-E « Reply #2 on: June 27, 2021, 01:09:28 AM »

I have juat pullged in mine in gray connector pin 5 and 6 i think and everything works , Power on,off illumination and navigation information. I was doing emulator and i think it was 500 kbps but i cant remember i have to check


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 10:35:17 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search