"Repairing" soldered ECU's with riser boards.

Pages: 1 [2]

« previous next »

Author

Topic: "Repairing" soldered ECU's with riser boards. (Read 8318 times)

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6035

	Re: "Repairing" soldered ECU's with riser boards. « Reply #15 on: November 08, 2021, 10:02:06 AM »

One of the basic understanding is that the moment you've molten the core the flux is gone. So just taking an iron and prodding something or even worse pushing hard on it, gives zero results.
Some flux has to be always molten in. Otherwise the solder gets instantly oxidized and you get nowhere. Just the basics. If you know the basics you can't screw up. Any time you are applying any kind of force, you are doing it wrong.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

jahko

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 47

	Re: "Repairing" soldered ECU's with riser boards. « Reply #16 on: November 08, 2021, 11:21:04 AM »

if you want to learn to solder, get some prototyping board and some 555's and LEDS and stuff, maybe a little kit with different resistors and capacitors, then build some little circuits. Get good, with your results actually working with new parts before attempting repair work.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 06:32:15 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search