Pin on ECU connector that corresponds to Pin 24 on Chip? (For Boot Mode)

Pages: [1]

« previous next »

Author

Topic: Pin on ECU connector that corresponds to Pin 24 on Chip? (For Boot Mode) (Read 3855 times)

trichard3000

Full Member

Karma: +6/-1
Offline

Offline

Posts: 57

	Pin on ECU connector that corresponds to Pin 24 on Chip? (For Boot Mode) « on: August 01, 2012, 05:23:43 PM »

I misread some of the posts and thought that the pin to short to ground for boot mode was pin 24 on the big ECU connector. Now that I've spent a bit more time with it, I see that it's actually pin 24 on the flash chip itself that needs grounded.

Is there any pin on the ECU connector that is common to pin 24 on the chip and can be used to force boot mode? If so, I'd like to wire this into my bench rig.

Thanks.


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Online

Online

Posts: 12268

	Re: Pin on ECU connector that corresponds to Pin 24 on Chip? (For Boot Mode) « Reply #1 on: August 01, 2012, 05:31:44 PM »

No.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

trichard3000

Full Member

Karma: +6/-1
Offline

Offline

Posts: 57

	Re: Pin on ECU connector that corresponds to Pin 24 on Chip? (For Boot Mode) « Reply #2 on: August 01, 2012, 05:38:45 PM »

Quote from: nyet on August 01, 2012, 05:31:44 PM

No.

Fair enough, thanks! :-)


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 04:19:23 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search