Pages: [1]
Author Topic: Throttle-cut when changing gears  (Read 1427 times)
Cheekano
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 60


« on: June 22, 2022, 11:03:29 PM »

I'm having issues with what I think is throttle cutting when shifting. I'm not too sure if it's negative deviation but looking at the logs, it doesn't seem to be.
actual and desired load/torque seemed to be okay. Fueling seems okay too based on the fuel rail pressure (unfortunately don't have log parameters for these).

Only happens when I shift quickly. If I lift off the pedal and step on it again, it goes back to normal. When granny shifting, she drives perfect. Any suggestions?

Thanks in advance.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)