Pages: [1]
Author Topic: 038906019 hj or fg EEPROM file needed  (Read 7502 times)
scirodriver
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 9


« on: October 09, 2012, 07:56:58 AM »

Hi,
Does someone have the eeprom file from these ecus? not the softwarefile in the flasch.
I programmed the ecu with wrong checksum, no it wont let me go into it anymore... :-(
Thank you
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« Reply #1 on: October 10, 2012, 01:35:50 AM »

I have for an hk and fe
Logged
scirodriver
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 9


« Reply #2 on: October 10, 2012, 02:03:58 AM »

Do you think that will work in my ecu?
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« Reply #3 on: October 10, 2012, 02:58:21 AM »

sorry wrong ecu my bad.
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #4 on: October 10, 2012, 05:35:04 AM »

Flash it in bootmode and the car works
Logged
scirodriver
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 9


« Reply #5 on: October 10, 2012, 12:34:25 PM »

i only have galletto 2, i dont have the function to do edc15p on boot mode... or is there a possibility?
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #6 on: October 11, 2012, 06:14:24 AM »

have you kwp2000 its can reflash without bootmode
Logged
scirodriver
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 9


« Reply #7 on: October 11, 2012, 03:18:37 PM »

tommorow i will solder the flash out and programm. wont work other way. then i might also have to solder out the eeprom.
but thanks!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)