NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > help apx wb conversion
Pages: [1]
« previous next »
Author Topic: help apx wb conversion  (Read 2172 times)
Anto97
Newbie
*

Karma: +1/-5
Offline Offline

Posts: 14
« on: June 14, 2022, 12:40:25 PM »
hi boys
i am trying to do a wideband conversion for my audi tt with apx engine
I remedied the collapse of an ecu 8E0909518AA
with immo off the auto part but does not accelerate
it only keeps idling but if I press the accelerator it does not respond and with the engine off if I press the accelerator the throttle body "click" is not heard
having said this, how do you think I can solve the problem?
forgive my english Smiley
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #1 on: June 14, 2022, 10:59:10 PM »
8E0909518AA is a A4 ecu, are you sure it will work with your engine?

Usually, if you have a APX/APY you would use a BAM or AMK file one BAM/AMK/AUQ/AUM something ecu.
Some of the longitudinal ecus will work but im not sure of your 8E0909518AA

Describe what you did, step by step to help you.
Logged
Anto97
Newbie
*

Karma: +1/-5
Offline Offline

Posts: 14
« Reply #2 on: June 15, 2022, 04:32:27 AM »
in practice I took this ecu I made it immo off and I tried to turn it on with the lambda probe disconnected and the car starts but if I try to accelerate it does not respond as if the accelerator was disconnected in diagnosis it gives me 4 errors on the can line that if I'm not mistaken the apx does not have and gives me an error on the throttle body
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425
« Reply #3 on: June 15, 2022, 06:19:34 AM »
And what about ECM relay that give power to TB?

Why you dont read forum little more?
Logged
Anto97
Newbie
*

Karma: +1/-5
Offline Offline

Posts: 14
« Reply #4 on: June 15, 2022, 07:57:01 AM »
sorry I thought that all the ecu wb were quite equal to each other. do you think there is a way to get this blessed throttle body going or not?
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425
« Reply #5 on: June 15, 2022, 08:20:01 AM »
You need ECM relay that will send power to 121 pin on ECU
It must be correct conected, otherwise it will not work.
Look at any shematic of WB ecu
Logged
Anto97
Newbie
*

Karma: +1/-5
Offline Offline

Posts: 14
« Reply #6 on: June 15, 2022, 02:29:51 PM »
thank you as soon as I have news I will update you
Logged
Anto97
Newbie
*

Karma: +1/-5
Offline Offline

Posts: 14
« Reply #7 on: June 18, 2022, 10:50:30 AM »
is it possible that I have damaged the ecu wd after trying a start with the old probe nb attached?
Logged
Anto97
Newbie
*

Karma: +1/-5
Offline Offline

Posts: 14
« Reply #8 on: June 19, 2022, 03:03:17 PM »
thank you very much for the tips i added pin 121 with 12 volts under key and now the tb works all that remains is to do all the electronic adaptation Roll Eyes
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 12:34:55 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)