NefMoto > Technical > Flashing and Chipping > ME7.5 KTAG full backup required
Pages: [1]
« previous next »
Author Topic: ME7.5 KTAG full backup required  (Read 4105 times)
bazgreener
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« on: August 16, 2022, 08:55:42 AM »
Hi all,  I have a bricked ME7.5 that i'm trying to save and was going to try restoring it with KTAG but i don't have a full backup file for it, only the flash and eeprom backups. Would anyone be able to send me a full ktag backup that would be compatible please?

HW: 0261206795
SW: 1037360313
VIN nr.:
SW ver.:
Spare:
Engine: 1.8L R4/5VT   
HW Ver.:
SW upg.: 8N0906018H  0004

cheers
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179
« Reply #1 on: August 16, 2022, 11:43:44 PM »
Literally Googling that part number gives you a Nefmoto link to an ori.
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #2 on: August 17, 2022, 04:43:39 AM »
I mean the dude has the flash and the eeprom.
There's no other flashable memories in the file, so he already has everything.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
bazgreener
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #3 on: August 17, 2022, 02:19:53 PM »
Quote from: prj on August 17, 2022, 04:43:39 AM
I mean the dude has the flash and the eeprom.
There's no other flashable memories in the file, so he already has everything.
To restore in ktag there are 3 files required as far as i can see, FLS, EPR & MPC, I've tried writing the 2 that i have individually but it won't work.
Logged
bazgreener
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #4 on: August 17, 2022, 02:21:17 PM »
Quote from: adam- on August 16, 2022, 11:43:44 PM
Literally Googling that part number gives you a Nefmoto link to an ori.
I have the ORI but it won't write, i've been told if i have a full ktag backup i should be able to get it working again.
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #5 on: August 18, 2022, 02:12:38 AM »
Quote from: bazgreener on August 17, 2022, 02:19:53 PM
To restore in ktag there are 3 files required as far as i can see, FLS, EPR & MPC, I've tried writing the 2 that i have individually but it won't work.
The "MPC" on this ECU is OTP. You can not write it or change it.

If writing flash and eeprom doesn't work either you have bad flash or eeprom or you destroyed the ECU.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 07:45:40 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 17 queries. (Pretty URLs adds 0s, 0q)