Pages: [1]
Author Topic: 2.0TSI EA888 with Garrett Stage 1 GT2260S  (Read 2019 times)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« on: August 27, 2022, 12:25:24 PM »

Hello, someone did remap on this engine with garrett stage 1 turbocharger?
Logged
Claudietto81
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #1 on: September 27, 2022, 01:19:35 PM »

yes
Logged
EanDem
Full Member
***

Karma: +8/-40
Offline Offline

Posts: 78


« Reply #2 on: September 28, 2022, 12:11:16 AM »

Hello, someone did remap on this engine with garrett stage 1 turbocharger?

You can mount and it will work on stock EA888 GEN3 2.0 engine - for full glory it has to be blended in squeeze all potential.
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #3 on: February 19, 2023, 05:26:11 AM »

someone know how tu adjust rod on wastegate? same as IS38 on 3.5-3.7V?? Now it run on stock DJHA 310ps engine, but it dont regulate properly, boost go over 2.0bar, so over the range of map sensor and after it show dtc P0234. Car is stock, sw stock 310ps.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0s, 0q)