NefMoto > ECU Files > ECU Definition Files > ECU Definition File Requests > 6K0906032 0002 dct table
Pages: [1]
« previous next »
Author Topic: 6K0906032 0002 dct table  (Read 7053 times)
rysiektr
Full Member
***

Karma: +3/-11
Offline Offline

Posts: 53
« on: July 24, 2024, 09:44:56 AM »
Hello All,
I'm looking for a CLAHSH, CLAHSHE, CLATES, CLATEVE, CLASLS, CLASLVE and CLASLPE adress.

I have similar 512kb files, but any mappack as I have dosen't have similar DCT table.

Thanks for help
Logged
_nameless
Hero Member
*****

Karma: +374/-3446
Offline Offline

Posts: 3018
« Reply #1 on: July 24, 2024, 09:58:42 AM »
If you configure prokon / eskonf properly you won't need cla. Also, if you need cla maps you will not have long term fuel trims.
Logged
UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
gremlin
Hero Member
*****

Karma: +218/-21
Offline Offline

Posts: 772
« Reply #2 on: July 24, 2024, 10:49:42 AM »
Quote from: _nameless on July 24, 2024, 09:58:42 AM
If you configure prokon / eskonf properly you won't need cla.

Here is PROKON/DEKON definitions for 6K0906032_0002 firmware.
Logged
_nameless
Hero Member
*****

Karma: +374/-3446
Offline Offline

Posts: 3018
« Reply #3 on: July 24, 2024, 10:52:13 AM »
Here I made a map pack with eskonf and prokon may
Logged
UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
rysiektr
Full Member
***

Karma: +3/-11
Offline Offline

Posts: 53
« Reply #4 on: August 01, 2024, 07:54:33 AM »
Hi, thanks for it, but I found PROKON and eskonf before post my question, I have problem with DCT table only.
Logged
_nameless
Hero Member
*****

Karma: +374/-3446
Offline Offline

Posts: 3018
« Reply #5 on: August 01, 2024, 10:02:06 AM »
Quote from: rysiektr on August 01, 2024, 07:54:33 AM
Hi, thanks for it, but I found PROKON and eskonf before post my question, I have problem with DCT table only.



For the second time: You will never trigger any faults with the hardware deleted properly using prokon and eskonf. If you need to use codewords to delete errors, you are doing it wrong.
Logged
UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • August 22, 2026, 12:06:35 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 2.742 seconds with 16 queries. (Pretty URLs adds 0.00099999999999989s, 0q)