NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Assembler for ME9 ECU
Pages: [1]
« previous next »
Author Topic: Assembler for ME9 ECU  (Read 1287 times)
toolstoy
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 11
« on: August 09, 2023, 11:41:10 PM »
Hello Everyone,
What assembler would everyone recommend for the MPC*** on ME9 for patching in ASM?
Online forum tells me GNU Assembler (which I have no experience with whatsoever). I just want to start on the correct foot moving forward.
I'm trying out my first asm patch so any help and tips would be appreciated.

TIA
Logged
elias
Full Member
***

Karma: +20/-3
Offline Offline

Posts: 65
« Reply #1 on: August 11, 2023, 06:27:00 PM »
I would start with Ghidra , as its featuring a built-in ASM. For making a start, its perfect.


If you are more advanced into this topic, here is some starting point with a full toolchain designed
for MED9. The principle will work on any ECU, but as you are talking about ME9, you wont need to adjust much, as the C-Compiler should fit.
https://github.com/EliasKotlyar/MED9Toolchain
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #2 on: August 12, 2023, 01:54:10 AM »
Codewarrior and it's compiler.
It's free for small size programs (which is what all your stuff is going to be).
It has a full toolchain, you can write code in C or ASM.

Always makes sense to use the tools from the manufacturer of the processor.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
toolstoy
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 11
« Reply #3 on: August 12, 2023, 03:37:39 AM »
Quote from: elias on August 11, 2023, 06:27:00 PM
I would start with Ghidra , as its featuring a built-in ASM. For making a start, its perfect.


If you are more advanced into this topic, here is some starting point with a full toolchain designed
for MED9. The principle will work on any ECU, but as you are talking about ME9, you wont need to adjust much, as the C-Compiler should fit.
https://github.com/EliasKotlyar/MED9Toolchain

Thanks for that. I will have a look at the github toolchain. Will checkout Ghidra as well.
Logged
toolstoy
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 11
« Reply #4 on: August 12, 2023, 03:41:05 AM »
Quote from: prj on August 12, 2023, 01:54:10 AM
Codewarrior and it's compiler.
It's free for small size programs (which is what all your stuff is going to be).
It has a full toolchain, you can write code in C or ASM.

Always makes sense to use the tools from the manufacturer of the processor.

Thanks for that. I thought CW is only trial but that is good to know. I will check it out
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 04:53:21 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)