Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Lambda Correction Factor is not working
Pages:
1
[
2
]
« previous
next »
Author
Topic: Lambda Correction Factor is not working (Read 11650 times)
silvaro
Newbie
Karma: +0/-0
Offline
Posts: 9
Re: Lambda Correction Factor is not working
« Reply #15 on: May 08, 2022, 10:14:08 AM »
Anyone found solution to set CWKONABG = 0 , and working Lambda Correction? I'm with 8E09095018AS ECU, and setting it to 0 kills lambda correction! No codes , rear O2 and Cat coded out.
Logged
prj
Hero Member
Karma: +1095/-514
Offline
Posts: 6167
Re: Lambda Correction Factor is not working
« Reply #16 on: May 08, 2022, 12:37:05 PM »
First restore all fault classes in your ECU. You most likely did not do code outs correctly.
CWKONABG is not responsible for working or non-working lambda correction. You are responsible by "coding out" things wrong, or you most likely changed something wrong.
As far as I remember, on 8E0909* there was no issue with it.
That said, there is no need to change CWKONABG to zero. If you want to disable SAI and cat heating just set FHOKH to a very high value.
«
Last Edit: May 08, 2022, 12:39:13 PM by prj
»
Logged
PM's will not be answered, so don't even try.
Log your car properly
-
WinOLS database
-
Tools/patches
silvaro
Newbie
Karma: +0/-0
Offline
Posts: 9
Re: Lambda Correction Factor is not working
« Reply #17 on: May 09, 2022, 05:58:46 AM »
Hi, thanks for the reply, changing FHOKH to FF FF solved my problem. I have not changed the error classes. I only changed the code words:
CDKAT / SP / SPF = 0
CWDLSAHK = 0
CDHSH = 0
CDHSHE = 0
CDLATV = 0
CDLASH = 0
CDLSH = 0
CLRSHK = 5
CLRSKA = 0
CWKONLS = 1
ESKONF- I removed the second oxygen probe, the SAI relay, and n112
MSLUB ALL 0
MSLBAS = 0.
I need to seriously read the documentation for me7.5
Logged
BlackT
Hero Member
Karma: +79/-42
Offline
Posts: 1468
Re: Lambda Correction Factor is not working
« Reply #18 on: September 10, 2023, 04:42:57 AM »
I am trying to figure out what turns off short fuel trims.
My focus is main on scenario where short fuel trims are higer over 15% than after some time ECU shut them off without DTC, after cycle ignition they are ON
Sometimes during tuning trims on LPG that annoying me, if it possible I want to turn it off or at least extend that time
Logged
Pages:
1
[
2
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
April 13, 2025, 11:22:00 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
