Hi,

I am an amateur in ECU tuning for only a cuple of months. One thing very strange is I flashed a file with pop and bangs tuned by myself to my car, using galletto and its ebay version cable, car runs just like before.
Steps I did to the file: Change Codeword thrust tur to 1
Min-Zundwinkel: RPM from 2520 to max and LOAD of first two lines, value is set to -15
There is another Min-Zundwinkel, I did the same.
Verzogerungszeit fur: change to 2.5 for corresponding rpm and load range.

Flashed using Galletto and its OBD cable. The flash process seemed legit and it took 217 seconds.
I have Ktag, maybe I should try to flash by that?  I also edited some of the values and the car runs like stock as well. I used to have a blue cable for nefmoto, but after some flash it broke.

Can someone give some hints? I would like to learn. Thanks in advance!


Edit:
Changed KFNWEGM to 5000rpm
KFTVSA to 2.5 seconds
KFZWMN, rpm 2560 to 6800, lowest two load, set to -30
KFZWOP, the range above, minus 20

Thanks. I'll reconstruct my question when I get home. I get a much better understanding to the logic, but may I know what's the pop and bangs megathread? I looked around but didn't find it

I added maps that I changed.