yes opened without error....what ols version do you have? i have 74chk ols 262

So, you had the circuit diagnostics disabled correctly. However, you will need more than just the circuit diagnostics for a proper sai delete. The prokon (project configuration bit switches) need to be set to zero, mainly CDSLS, and best off setting CWKONABG to zero. Anyway I made the changes for you on the original file you posted. Not needed but for completeness I set  MSLUB and MSLBAS to zero and FHOKH to FF.

Checksums done using ECU Fix. Not trying to be rude but Im not going to help you diagnose counterfeit software. 

Please .. if i set this cons. to 0 .
Readiness in vcds will be green ?

    SRYAGR (0x810974) - Threshold for Readiness formation EGR diagnosis (unused)
    SRYHS (0x810975) - Threshold for Readiness formation O2 sensor heating diagnosis (ready bit 6)
    SRYKAT (0x810976) - Threshold for Readiness formation catalyst diagnosis (ready bit 0)
    SRYLS (0x810977) - Threshold for Readiness formation lambda sensor diagnosis (ready bit 5)
    SRYSLS (0x810978) - Threshold for Readiness formation SAI diagnosis (ready bit 3)
    SRYTES (0x810979) - Threshold for Readiness formation canister purge diagnosis (ready bit 2)

thanks