NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > ME7 wideband harness receptacle contact p/n
Pages: [1]
« previous next »
Author Topic: ME7 wideband harness receptacle contact p/n  (Read 1789 times)
Lkz666
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« on: November 09, 2023, 07:53:10 PM »
First time posting... I am building a couple of wideband conversion harnesses for narrowband Audi TT's, I have all of the parts except I cannot figure out what is the p/n for the little tiny receptacle contacts that plug into the ECU. For pins 52 & 71.  Does anyone know the part number?  I have searched and searched but can't figure it out. Thanks.
Logged
prj
Hero Member
*****

Karma: +1034/-438
Offline Offline

Posts: 5884
« Reply #1 on: November 10, 2023, 12:37:17 AM »
Not sure you can buy those separately, because all the connectors come pre-pinned with them.
Meaning even if there's no wire, the receptacle is there.

I'm sure there is some sort of electronics part number, but I've no idea what it is, sorry.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
Geomeo
Full Member
***

Karma: +10/-6
Offline Offline

Posts: 148
« Reply #2 on: November 10, 2023, 12:47:16 AM »
Hello.

Google keywords:
Junior Power Timer and Micro Power Timer.  

Look for a crimp tool that does between 0.25 and 1mm.  Also I'm sure I bought a universal connector kit to pull the old ones out.  It's basically 2 prong deal.  I think I could've made myself with a fork and some grinding.  Only problem is with that is the Mrs does not like it when her cutlery goes missing  Grin. 

Logged
prj
Hero Member
*****

Karma: +1034/-438
Offline Offline

Posts: 5884
« Reply #3 on: November 10, 2023, 04:02:38 AM »
Quote from: Geomeo on November 10, 2023, 12:47:16 AM
Hello.

Google keywords:
Junior Power Timer and Micro Power Timer.  

Look for a crimp tool that does between 0.25 and 1mm.  Also I'm sure I bought a universal connector kit to pull the old ones out.  It's basically 2 prong deal.  I think I could've made myself with a fork and some grinding.  Only problem is with that is the Mrs does not like it when her cutlery goes missing  Grin.  

JPT was used on the older 55 pin fat connector.
I am not sure at all that MPT is what is used in the newer one, there's only one prong that is used on them for holding it in.
Haven't disassembled one in a while though.

I know the new plugs use these: 1 928 492 556

I think the ME7 style plugs could be 1 928 498 055, but not sure.
Could also be 1 928 498 000 and 1 928 498 001 but I remember it being rectangular, not round.
« Last Edit: November 10, 2023, 04:13:34 AM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly.
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1278
« Reply #4 on: November 10, 2023, 10:58:49 AM »
Quote from: Lkz666 on November 09, 2023, 07:53:10 PM
First time posting... I am building a couple of wideband conversion harnesses for narrowband Audi TT's, I have all of the parts except I cannot figure out what is the p/n for the little tiny receptacle contacts that plug into the ECU. For pins 52 & 71.  Does anyone know the part number?  I have searched and searched but can't figure it out. Thanks.

FYI there are spare pins in the connector itself without wires(not in all the locations). , take it out and solder it /crimp whatever. and put it back.
I did it the same way.

If you need the pins then gl I could never really find similar ones except the BCB ones prj said. But like I said I could salvage the pins from a spare location.
Logged
Schumo
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 17
« Reply #5 on: November 10, 2023, 11:10:51 AM »
They should be AMPMODU Mod IV contacts.
https://www.te.com/usa-en/product-141603-4.html

To be 100% sure I need a partnumber of the plug or the ECU.
Logged
eg4
Newbie
*

Karma: +3/-1
Offline Offline

Posts: 23
« Reply #6 on: November 10, 2023, 12:45:35 PM »
Quote from: Schumo on November 10, 2023, 11:10:51 AM
They should be AMPMODU Mod IV contacts.
https://www.te.com/usa-en/product-141603-4.html

To be 100% sure I need a partnumber of the plug or the ECU.


these are the connectors https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F114-18167%7FE%7Fpdf%7FGerman%7FGER_SS_114-18167_E.pdf%7F1241026-1
Logged
mdz
Full Member
***

Karma: +12/-1
Offline Offline

Posts: 73
« Reply #7 on: November 10, 2023, 01:28:00 PM »
Grab some me7/edc15 ecu connectors from scrapyard, empty positions are filled with new unused contacts. Same goes with 32pin dashboard connectors from B5, C5 and other VAGs from the same era, same contacts can be found there.
Logged
prj
Hero Member
*****

Karma: +1034/-438
Offline Offline

Posts: 5884
« Reply #8 on: November 11, 2023, 05:20:03 AM »
Quote from: eg4 on November 10, 2023, 12:45:35 PM

these are the connectors https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F114-18167%7FE%7Fpdf%7FGerman%7FGER_SS_114-18167_E.pdf%7F1241026-1
Very nice.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • June 25, 2024, 04:44:53 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)