ME7.1.1 V6/R32 pin67 crash

Pages: [1]

« previous next »

Author

Topic: ME7.1.1 V6/R32 pin67 crash (Read 628 times)

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	ME7.1.1 V6/R32 pin67 crash « on: May 03, 2024, 12:31:43 AM »

Hi,

is there any variant of the ME7 awaiting a cable/signal on pin 67 to work?
I only know this from ME7.5 1.8t where the ecu will work and just showing a DTC. The cable is not needed.

Currently working on a BHE V6/R32 which has this pin 67 in the wiring diagram. Car shows no rpm when cranking.
Do i have to connect something there when swapping into another chassis?


	Logged

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: ME7.1.1 V6/R32 pin67 crash « Reply #1 on: May 03, 2024, 03:23:47 AM »

Quote from: aef on May 03, 2024, 12:31:43 AM

Do i have to connect something there when swapping into another chassis?

Pin 67 on ME7.5 is the crash signal from ABS (pin 69).


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: ME7.1.1 V6/R32 pin67 crash « Reply #2 on: May 03, 2024, 04:09:15 AM »

Okay but how does your comment help me in that case?

On ME7.5 i know that you dont have to connect it and the car will run.

For ME7.1.1 or others i am looking for information if this cable is needed and if i can connect it to 31 or 15 or what todo.

The car doesnt show rpm when cranking and i dont know if this is related.
We will try new crank sensor because he only bought the engine and we didnt know if it was running.
I will try to check B_bm later.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: ME7.1.1 V6/R32 pin67 crash « Reply #3 on: May 03, 2024, 02:25:43 PM »

answer: you dont need it


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 06:34:43 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search