hi ive been looking for xdf or damos file for a very long time. idk what im doing wrong, everyone i ask i get vague responses about "there out there ,got to look" or its similar to "XYZ" , usually the aeb, but never provide me with a link. Can someone provide a clear ink to a file, or a datatabase  or even some site i can buy it from. Is there sometiong im not understanding about all this ? Am i missing a secret code word? Secret handshake?  

Understand that the documentation originates from Bosch and has been leaked intermittently, resulting in an incomplete dataset. Users rely on the available documentation and often create and share their own definitions. If your software version isn't available, you have three options:

Utilize a similar software version with comparable engine and ECU logic to identify the necessary maps for tuning.
Locate a compatible, defined software version and perform a cross-flash.
Opt for a paid solution. While occasional assistance may be offered, typically, users must conduct their own research or hire assistance.
Notably, modifying the Beetle ECU is uncommon, with no publicly available AEG definitions. I've developed a comprehensive map pack by referencing the M3.8.1 VR6 DAMOS and incorporating elements from the turbo M3.8.3 / M5.9.2 1.8T definitions.
If you post your file and ask for specific maps you need Im sure you would get some assistance. I can definitely tell you that no matter how hard you look, you wont find anything for that. Matter of fact the only obd2 AAA and ABA damos available are the ones that I have made and shared. 

I'm not trying to be rude, the fact of the matter not too much information publicly exists, any development done was from someone spending hours if not days making a suitable definition and testing in car. Do you really expect someone to hand it over for free? The ONLY aba and aaa obd2 definitions that exist are ones that Ive posted, and again NOTHING public exist for them before that. Also, none of the definitions or walkthroughs are missing, they are all still there, and if you can not download any files from ecu connections odds are you do not have enough posts. Also, you need to be a exceptional member to download files from specific portions of that form. The way you get that status is by helping other members and actually contributing to the forum.

As far as flashing these ecus its simple, google m5.9.2 mpps pinout and you will easily find the pinout to flash it on the bench. It's been covered here a handful of times, if you need to search for a specific topic, use google to search the topic and type "nefmoto" after and you will find more results from the forum. Switching off the immo requires reading out the eeprom with some kind of chip burner, you may be able to use a clamp or probes to read it out too, but I personally just hot air them. If you find an original from a 98-99 manual beetle they do not have immo and will start without touching the eeprom. Emissions can be switched off with codewords, however readiness will still show incomplete, additional mods need to be made to set readiness. Fueling calibration is the same as any other m3.8.3 / m5.9.2 its been covered several times.

If you are planning on swapping the  management why not just go with me7? I mean besides swapping the throttle and throttle pedal its the same amount of effort as swapping m5.9.2, and you can use the the ignition coil from the  avh/ azg / bev / bbw. The me7.5 comes with a factory wideband ecu, and has boost based software versions. Ive actually swapped a subaru to run a 1.8t ecu, it would be a lot easier on a lot of levels.

Lastly I just want to add, the amount of people that can actually custom tune a m5.9.2 setup in the states is about 5 or less, most just flash files others have made. If you have any specific questions like map locations I can help you with that. Per the forum rules its required to post the original file when asking for definition files. Its kinda hard to help you if you can not provide the bare minimum on your end...

so im back on this project , i acquired a neuspeed tuned aeg ecu wich should do what i need. now i need to immo delete that. Any tutorials out there? i know its a 24c02 eeprom , theres editors outthere, there even sites that guys will edit it for you wich id grat, but so far no luck finding what program to use to read and write and how to do it.