NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > MED9.1 1K0907115L - Change Lambda in partial load
Pages: [1]
« previous next »
Author Topic: MED9.1 1K0907115L - Change Lambda in partial load  (Read 182 times)
Dafrank
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 2
« on: November 17, 2024, 02:32:05 AM »
Hello everyone. My name is Daniel and I come from Germany. I drive a Golf 5 GTI bj 2005 with a BYD from 2008, a TTE480...

I have been driving with the data from a tuner for about 7 years now and have never been really satisfied. So I want to learn to adapt it bit by bit to my needs.

Now I have tried to drive with Lambda 1.1 at partial load up to 55% . To do this I changed the three LAMFA_0, LMFA_1, LMFA_2.

I looked at KFLBTS_0, KFLBTS_1, KFLBTS_2 and I don't think I need to change anything here.

The control unit does not seem to be able to do this. While driving I could see that it was always trying to keep Lambda 1.0. Always. (partial load)


I will provide you with the data.

https://drive.google.com/file/d/1HJLBFFfqcKaTNF9DHvfKJT1Rx4vd9R6z/view?usp=sharing

I would be very happy if someone would like to help me.
« Last Edit: November 17, 2024, 06:58:49 AM by Dafrank » Logged
Dafrank
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 2
« Reply #1 on: November 19, 2024, 03:34:39 AM »
Okay, I think the problem is that the ECU only runs on "homogen" and therefore a maximum of lambda 1.0 is possible.

Can anyone tell me which maps I need to change so that it runs in homogen-lean at lower speeds/load? BDEMEN

I have already tested a little but it does not seem to work. Lambda is maximum at 1.0







Quote from: Dafrank on November 17, 2024, 02:32:05 AM
Hello everyone. My name is Daniel and I come from Germany. I drive a Golf 5 GTI bj 2005 with a BYD from 2008, a TTE480...

I have been driving with the data from a tuner for about 7 years now and have never been really satisfied. So I want to learn to adapt it bit by bit to my needs.

Now I have tried to drive with Lambda 1.1 at partial load up to 55% . To do this I changed the three LAMFA_0, LMFA_1, LMFA_2.

I looked at KFLBTS_0, KFLBTS_1, KFLBTS_2 and I don't think I need to change anything here.

The control unit does not seem to be able to do this. While driving I could see that it was always trying to keep Lambda 1.0. Always. (partial load)


I will provide you with the data.

https://drive.google.com/file/d/1HJLBFFfqcKaTNF9DHvfKJT1Rx4vd9R6z/view?usp=sharing

I would be very happy if someone would like to help me.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 02:16:37 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0.004s, 0q)