Pages: [1]
Author Topic: APP loom to AJQ conversion  (Read 897 times)
el_wacunio
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: March 06, 2025, 11:18:21 AM »

Hi!

As mentioned in the subject, is there a possibility to change the wires to make AJQ ECU work in an APP? I have a working AJQ ECU with immo off, but the APP car only cranks but won't start.

Thanks in advance.
Logged
willemml
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 52


« Reply #1 on: March 06, 2025, 08:30:52 PM »

Are you trying to fix the no start issue by swapping the ECU?
I would investigate other things before going that route.
Logged
el_wacunio
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: March 11, 2025, 02:30:08 AM »

The problem is fixed, the car wouldn't start because of the ecm power relay J271 located under the hood. AJQ engines didn't have them, so I shorted it out, and now everything works Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.047 seconds with 17 queries. (Pretty URLs adds 0s, 0q)