Hello, i have this car that does not start, the diagnosis gives these errors:

P1647

U0166
U1121
P0263
P0269
P0272
P0266
P0263
P0269
P0272
P0266
P1612
P1640
P160A
P1570

I read the engine control unit and the eeprom has lost all the data (coding, VIN, IMMO etc etc...)

I have the backup of another identical car (same HW and SW) so i used the eeprom of another car and did immo off in the flash, the car starts but not run very well, the chassis cannot be read with the diagnosis and there are the following DTCs:

P1570

P160A

The P1570 error is related to immo off and is not a problem, but P160A maybe is related to VIN-IMMO-CKS.  Anyone have any ideas to fix the chassis and maybe re-enter some IMMO data  to make P160A disappear.

Thanks in advance