Pages: [1]
Author Topic: Need some help to get more power out 1.8T high boost (3bar)  (Read 195 times)
BlackT
Hero Member
*****

Karma: +80/-42
Offline Offline

Posts: 1483




As title say I am running high boost 1.8T, puslar GTX3584rs gen3  at E100, ADR cams. I don't have any clue where to set ignition, car is making same power(around 900 hp) at 2.6 and 3 bar boost, also iginition ends (8000 rpm)  at 24° or 27° there is no change in power

I don't want to dyno car, it is allready at maximum so dyno runs maybe will kill it, it is for drag racing.
Engine is running great, make great powerband but I want to discus is there any chance to make more power. Do I need to go on lower ingnition angle at that high boost levels?  
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 15 queries. (Pretty URLs adds 0s, 0q)