Pages: [1]
Author Topic: Passat 2.0 TFSI MED17 Torque limit problem.  (Read 967 times)
Botosjeti
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: July 30, 2025, 12:10:14 AM »

Hi!
I'm struggling to tune this car, originally 211hp/280Nm. I don't have too much experience in petrol MED system so need some help/advice what I missed.
I feel some difference in power but in log I can see 343Nm max engine torque but I think it is low as I set all torque limiters (I think) to 400Nm so car should produce about 370-80Nm. With original SW I can see 312Nm maximum in the same channel. Torque limiters are set to 400Nm in DSG sw and using 100octane petrol, ignition retard is 0KW to the redline.

Other thing is "DSG fart". I can make Pop&Bangs with standing and rolling car but cannot make any pops during shifts. I made KFZWKEVABO and KFZWMNGS but no effect Sad.
Please be kind and check my file what can cause 343Nm max torque and no bangs during shifts.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 15 queries. (Pretty URLs adds 0.001s, 0q)