Pages: [1]
Author Topic: EDC15P+ Please help find FMOTC CANVERS CWGC  (Read 5567 times)
billi
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 7


« on: April 15, 2025, 07:42:50 AM »

Hello everyone. I need to connect the automatic transmission from the A6 C5 allroad 2.5tdi to the EDC15P+ 1.9 tdi PD ECU. I know that I need to find the parameters of the
CONVERSE CWGC FMOTC in the engine ECU
.
But I haven't been able to find their location in the firmware file for a week now. Please help me find these parameters. Any information would be helpful.
Logged
_nameless
Hero Member
*****

Karma: +374/-3447
Offline Offline

Posts: 3018



« Reply #1 on: April 15, 2025, 08:36:12 AM »

Hello everyone. I need to connect the automatic transmission from the A6 C5 allroad 2.5tdi to the EDC15P+ 1.9 tdi PD ECU. I know that I need to find the parameters of the
CONVERSE CWGC FMOTC in the engine ECU
.
But I haven't been able to find their location in the firmware file for a week now. Please help me find these parameters. Any information would be helpful.

because you are looking for something that doesnt exist
Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
billi
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 7


« Reply #2 on: April 16, 2025, 02:18:58 AM »

because you are looking for something that doesnt exist
You shouldn't think that.
Perhaps these parameters have a different name in the damos file for diesel. But they are there.
The issue has been resolved. The data has been corrected. The automatic transmission works perfectly.
Logged
_nameless
Hero Member
*****

Karma: +374/-3447
Offline Offline

Posts: 3018



« Reply #3 on: April 16, 2025, 02:27:17 AM »

You shouldn't think that.
Perhaps these parameters have a different name in the damos file for diesel. But they are there.
The issue has been resolved. The data has been corrected. The automatic transmission works perfectly.

I never said it couldnt be done, The map names you listed do not exist in edc15. So if you are going to ask for specific maps in a specific ecu you should at least know what you are asking for  Wink
« Last Edit: April 16, 2025, 02:29:11 AM by _nameless » Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
billi
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 7


« Reply #4 on: April 16, 2025, 05:11:14 AM »

I never said it couldnt be done, The map names you listed do not exist in edc15. So if you are going to ask for specific maps in a specific ecu you should at least know what you are asking for  Wink
I totally agree with you.
Logged
dus
Newbie
*

Karma: +1/-4
Offline Offline

Posts: 22


« Reply #5 on: April 16, 2025, 08:15:58 PM »

in edc id288H mrwMULINF0 mrwMULINF1 mrwMULINF2
Logged
Armands.T
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 2


« Reply #6 on: February 04, 2026, 05:50:34 AM »

You shouldn't think that.
Perhaps these parameters have a different name in the damos file for diesel. But they are there.
The issue has been resolved. The data has been corrected. The automatic transmission works perfectly.


Hello
Wwho helped you solve this problem?
Who can I contact with a similar problem?
Maybe you can explain the solution?

Best regards.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 2.464 seconds with 15 queries. (Pretty URLs adds 0.00099999999999989s, 0q)