patrick125
Newbie
Karma: +1/-0
 Offline
Posts: 4
|
 |
« on: August 15, 2012, 05:09:44 AM »
|
|
|
Hello,
I have a Problem, i have an original KESS v2 and K-TAG from alientech, i can not read out a BOSCH EDC15 VM from a Skoda Octavia 110HP Year. 12:1998
Can i read with the Kess V2 EDC15 with Bootlader, i have no instructions in the Software for this.
Please can anybody of here help me,
Thank You
|
|
|
|
|
Logged
|
|
|
|
|
matchew
|
|
« Reply #1 on: August 15, 2012, 05:21:52 AM »
|
|
|
Contact the maker of the tool and ask them for some instructions.
|
|
|
|
|
Logged
|
|
|
|
patrick125
Newbie
Karma: +1/-0
Offline
Posts: 4
|
|
« Reply #2 on: August 15, 2012, 05:28:52 AM »
|
|
|
Yes that could i make,
have you also often problems with edc15, does it go when i take out the ecu and connect it on the bensch.
thank you for your quick answer
|
|
|
|
|
Logged
|
|
|
|
chiptuners
Newbie
Karma: +4/-1
Offline
Posts: 17
|
|
« Reply #3 on: August 15, 2012, 01:16:28 PM »
|
|
|
take ecu out its probably a msa 15 ecu with 2 plcc32 chips need to be soldered,
i have got chips for this if needed.
|
|
|
|
|
Logged
|
|
|
|
patrick125
Newbie
Karma: +1/-0
Offline
Posts: 4
|
|
« Reply #4 on: August 15, 2012, 01:20:49 PM »
|
|
|
hi,
It is EDC15, not MSA15.
And oft people say that EDC15 is problem to read, many people say that the fuse from the instrument cluster to remove to connect, and many say take it out and connect to the pins and it goes.
have any one hear the same problems. and how does bootloader work on EDC15.
|
|
|
|
|
Logged
|
|
|
|
chiptuners
Newbie
Karma: +4/-1
Offline
Posts: 17
|
|
« Reply #5 on: August 15, 2012, 01:26:19 PM »
|
|
|
you can bench edc15 with no errors no problem, try take fuse out (instrument cluster fuse) i think its number 11
or definitely bench flash will work via kess v2 i done before., kess v2 is not great on the older edc15 me7.5 mpps does these fine.
|
|
|
|
|
Logged
|
|
|
|
patrick125
Newbie
Karma: +1/-0
Offline
Posts: 4
|
|
« Reply #6 on: August 24, 2012, 03:54:29 AM »
|
|
|
Yes it think also that kess does not go really good on these old ecu´s. i think that is not great that the K-TAG can not do the edc15 via bootloader.
|
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #7 on: August 24, 2012, 05:24:31 AM »
|
|
|
Quite sure that ECU has 2xPLCC32.
Open, desolder, socket, etc.
The first EDC15 also had 2xPLCC32, not only MSA15 IIRC.
|
|
|
|
|
Logged
|
|
|
|
augustinbz
Newbie
Karma: +0/-1
Offline
Posts: 6
|
|
« Reply #8 on: October 21, 2012, 03:50:09 PM »
|
|
|
till 2000/2001 you will find PLCC32 so your skoda for sure has PLCC inside.
|
|
|
|
|
Logged
|
|
|
|
|
