NefMoto > Technical > Flashing and Chipping > ME7.1 immo off - lamp blinking
Pages: [1]
« previous next »
Author Topic: ME7.1 immo off - lamp blinking  (Read 7287 times)
gregsback
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 50
« on: September 20, 2012, 08:53:16 AM »
Dear all,
I have changed 0x12 and 0x22 in M95040 and corrected Checksums.
Immo is off, but the lamp of immobilizer is blinking. fault code says "Adapt Key"
Does anybody know what might be the rootcause?
many thanks in advance!

Greg
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #1 on: September 20, 2012, 09:15:29 AM »
They keys arent adapted to the immo unit....
Logged
gregsback
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 50
« Reply #2 on: September 20, 2012, 09:22:51 AM »
do you know waht to chane in the M95040 to overcome this issue?
Logged
prj
Hero Member
*****

Karma: +1059/-465
Offline Offline

Posts: 5957
« Reply #3 on: September 21, 2012, 02:07:37 AM »
Quote from: gregsback on September 20, 2012, 09:22:51 AM
do you know waht to chane in the M95040 to overcome this issue?

Nothing. You already disabled the immo, so the car starts.
What you need to do is adapt the keys to the cluster. The 95040 in the ECU has nothing to do with this.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
slowguy
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 39
« Reply #4 on: October 02, 2012, 03:38:26 AM »
Quote from: prj on September 21, 2012, 02:07:37 AM
Nothing. You already disabled the immo, so the car starts.
What you need to do is adapt the keys to the cluster. The 95040 in the ECU has nothing to do with this.

I had the same issue with a previous ecu. Car would start but immo light kept blinking in dash. To adapt the keys to the cluster would you still need the 7 digit SKC to do this is VCDS?
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #5 on: October 03, 2012, 04:29:09 AM »

Yes you still need the SKC. its only 4 digits though. And of course put the "0" in front of it.
Logged
slowguy
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 39
« Reply #6 on: October 03, 2012, 04:57:10 AM »
My immo is 3, and the ecu is 7.1.1. Is this 4 or 7 digits?
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303
« Reply #7 on: October 03, 2012, 05:07:13 AM »
its 4.
its always 4
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #8 on: October 04, 2012, 08:43:24 AM »
Quote from: slowguy on October 03, 2012, 04:57:10 AM
My immo is 3, and the ecu is 7.1.1. Is this 4 or 7 digits?

Just open my me7 tuner wizzard (eeprom modder sheet). Load your ori eeprom and it will show you your SKC key
Logged
ME7Tuner Wizard
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • September 28, 2024, 03:44:32 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 2.566 seconds with 18 queries. (Pretty URLs adds 0.00099999999999989s, 0q)