Pages: [1]
Author Topic: CH box software versions  (Read 6459 times)
belligerent_b5
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« on: July 29, 2012, 04:40:03 PM »

I'm building an .xdf for the CH box using a map pack created by Rob.mwpropane for the CH box with s/w ver 360854, while my ECU is ver 360101. Are the different versions enough to keep the address from the maps from lining up correctly? Or am I just doing it wrong?

Also, could I just flash the 360854 .bin to my ECU and save myself the headache of manually finding all the addresses of the maps?
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #1 on: July 29, 2012, 09:48:08 PM »

Are the different versions enough to keep the address from the maps from lining up correctly? Or am I just doing it wrong?

Also, could I just flash the 360854 .bin to my ECU and save myself the headache of manually finding all the addresses of the maps?

The maps won't line up correctly between those two, but the x and y axis do. If you give me until tomorrow evening, I have a kp.file (definition file for winols) that I've been meaning to post for a while for the 360101. Or you can flash to the other revision no problem. I know someone (nyet?) on here has been working on a kp to xdf converter, but I'm unsure if it workstations on the winols version I use (1.7). Either way, I have an updated version of both revisions with more stuff defined, mostly all that's been discussed over the last few months.

Fwiw, easiest way to find maps is with winols, even the demo. Compare in 2d mode. Cheers.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #2 on: July 30, 2012, 03:09:17 AM »

Posted in my ori thread in Ecu def files.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
belligerent_b5
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #3 on: July 30, 2012, 09:56:12 AM »

Thanks rob
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #4 on: July 30, 2012, 03:25:52 PM »

Thanks rob

Sure, it should be pretty obvious that anything at the top is still a work in progress, anything in folders is legit (should be anyway;). Cheers.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
dirtygerman
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #5 on: August 07, 2012, 09:30:39 PM »

hate to ask but have you created or know of a XDF file for the CH box?
Logged
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269



« Reply #6 on: November 06, 2012, 03:58:15 PM »

And succes in creating the CH xdf?
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #7 on: November 06, 2012, 04:04:34 PM »

4b0906018ch?
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #8 on: November 06, 2012, 04:37:12 PM »

No, I have not personally done an xdf for the 4b0906018Ch, I have had some people say they were going to convert to xdf, but I haven't heard anything yet.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)