Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
help with log from v1.6.0.0 Flashing sw
Pages: [
1
]
« previous
next »
Author
Topic: help with log from v1.6.0.0 Flashing sw (Read 5794 times)
elRey
Hero Member
Karma: +32/-1
Offline
Posts: 565
help with log from v1.6.0.0 Flashing sw
« on: January 05, 2011, 08:38:41 PM »
I've tries with a generic vag-com cable and my HEX-USB:
1.6.0.0 on a acer netbook running windows 7 starter:
05/Jan/2011 09:33:28.546: USER: Switching to KWP2000 session.
05/Jan/2011 09:33:28.608: LOG: Opened FTDI device.
05/Jan/2011 09:33:28.670: LOG: FTDI device info - Description: Ross-Tech HEX-USB Serial Number: RT000001 Device Type: FT_DEVICE_BM Device ID: 0x403FA20 Device Flags: 0x0
05/Jan/2011 09:33:28.670: LOG: FTDI ChipID DLL is loaded, checking chip ID...
05/Jan/2011 09:33:28.702: LOG: Unable to read FTDI device chip ID
05/Jan/2011 09:33:28.748: LOG: Starting send receive thread.
05/Jan/2011 09:33:28.795: LOG: Send receive thread now started.
05/Jan/2011 09:33:28.795: USER: Disconnected
05/Jan/2011 09:33:28.904: USER: Connection attempt number 1.
05/Jan/2011 09:33:28.920: USER: Connecting...
05/Jan/2011 09:33:29.263: USER: Connecting to address 0x01.
05/Jan/2011 09:33:31.603: LOG: Failed to read sync byte. Read 0 bytes.
05/Jan/2011 09:33:31.681: USER: Slow init failed.
05/Jan/2011 09:33:31.681: USER: Disconnected
05/Jan/2011 09:33:31.728: USER: Connection attempt number 2.
05/Jan/2011 09:33:31.744: USER: Connecting...
05/Jan/2011 09:33:32.165: USER: Connecting to address 0x01.
05/Jan/2011 09:33:34.364: USER: Slow init succeeded.
05/Jan/2011 09:33:34.396: USER: Switching to KWP1281 session.
05/Jan/2011 09:33:34.552: LOG: KWP1281 read block
05/Jan/2011 09:33:34.645: LOG: KWP1281 sent block
05/Jan/2011 09:33:34.910: LOG: KWP1281 read block
05/Jan/2011 09:33:35.035: LOG: KWP1281 sent block
05/Jan/2011 09:33:35.144: LOG: KWP1281 read block
05/Jan/2011 09:33:35.238: LOG: KWP1281 sent block
05/Jan/2011 09:33:35.363: LOG: KWP1281 read block
05/Jan/2011 09:33:35.488: LOG: KWP1281 sent block
05/Jan/2011 09:33:35.519: LOG: KWP1281 read block
05/Jan/2011 09:33:35.675: LOG: KWP1281 sent block
05/Jan/2011 09:33:35.690: USER: KWP1281 connect info: ?6A906032KR 1.8l 5VT NB AG4 G04 4743 B
05/Jan/2011 09:33:37.235: USER: Connecting to address 0x01.
05/Jan/2011 09:33:39.450: USER: Slow init succeeded.
05/Jan/2011 09:33:39.637: LOG: KWP1281 read block
05/Jan/2011 09:33:39.700: LOG: KWP1281 sent block
05/Jan/2011 09:33:40.043: LOG: KWP1281 read block
05/Jan/2011 09:33:40.105: LOG: KWP1281 sent block
05/Jan/2011 09:33:40.277: LOG: KWP1281 read block
05/Jan/2011 09:33:40.339: LOG: KWP1281 sent block
05/Jan/2011 09:33:40.495: LOG: KWP1281 read block
05/Jan/2011 09:33:40.558: LOG: KWP1281 sent block
05/Jan/2011 09:33:40.682: LOG: Final byte of KWP1281 message was not block end byte.
05/Jan/2011 09:33:40.698: LOG: KWP1281 read block failed.
05/Jan/2011 09:33:40.729: USER: Failed to read KWP1281 connect info.
05/Jan/2011 09:33:42.227: USER: Connecting to address 0x11.
05/Jan/2011 09:33:44.426: USER: Slow init succeeded.
05/Jan/2011 09:33:44.442: USER: Switching to KWP2000 session.
05/Jan/2011 09:33:44.816: LOG: Sent message with service ID StartCommunication
05/Jan/2011 09:33:44.863: LOG: Received message with service ID StartCommunicationPositiveResponse
05/Jan/2011 09:33:44.879: USER: Connected
05/Jan/2011 09:33:47.390: LOG: Sent message with service ID TesterPresent
05/Jan/2011 09:33:47.453: LOG: Resending message. Send attempts: 2
05/Jan/2011 09:33:47.468: LOG: Sent message with service ID TesterPresent
05/Jan/2011 09:33:47.546: LOG: Resending message. Send attempts: 3
05/Jan/2011 09:33:47.562: LOG: Sent message with service ID TesterPresent
05/Jan/2011 09:33:47.624: LOG: Failed to send message 3 times, message send failed.
05/Jan/2011 09:33:47.640: USER: Disconnecting because no response was received for the Tester Present message.
05/Jan/2011 09:33:47.749: USER: Disconnected
05/Jan/2011 09:33:47.796: LOG: Closing FTDI device.
05/Jan/2011 09:33:47.827: LOG: Send receive thread now terminated.
05/Jan/2011 09:33:50.276: USER: Switching to KWP2000 session.
05/Jan/2011 09:33:50.401: LOG: Opened FTDI device.
05/Jan/2011 09:33:50.401: LOG: FTDI device info - Description: Ross-Tech HEX-USB Serial Number: RT000001 Device Type: FT_DEVICE_BM Device ID: 0x403FA20 Device Flags: 0x0
05/Jan/2011 09:33:50.448: LOG: FTDI ChipID DLL is loaded, checking chip ID...
05/Jan/2011 09:33:50.448: LOG: Unable to read FTDI device chip ID
05/Jan/2011 09:33:50.510: LOG: Starting send receive thread.
05/Jan/2011 09:33:50.510: LOG: Send receive thread now started.
05/Jan/2011 09:33:50.651: USER: Disconnected
05/Jan/2011 09:33:50.666: USER: Connection attempt number 1.
05/Jan/2011 09:33:50.713: USER: Connecting...
05/Jan/2011 09:33:50.713: USER: Connecting to address 0x01.
05/Jan/2011 09:33:51.150: LOG: Sent message with service ID StartCommunication
05/Jan/2011 09:33:51.150: LOG: Idle end: 325ms Low end: 350ms High end: 375ms Message Send Time: 375ms
05/Jan/2011 09:33:51.181: USER: Fast init succeeded.
05/Jan/2011 09:33:51.212: LOG: Failed to send message 1 times, message send failed.
05/Jan/2011 09:33:51.275: USER: Disconnected
05/Jan/2011 09:33:51.306: USER: Connection attempt number 2.
05/Jan/2011 09:33:51.337: USER: Connecting...
05/Jan/2011 09:33:51.353: USER: Connecting to address 0x01.
05/Jan/2011 09:33:51.774: LOG: Sent message with service ID StartCommunication
05/Jan/2011 09:33:51.774: LOG: Idle end: 325ms Low end: 350ms High end: 375ms Message Send Time: 375ms
05/Jan/2011 09:33:51.868: USER: Fast init succeeded.
05/Jan/2011 09:33:51.868: LOG: Failed to send message 1 times, message send failed.
05/Jan/2011 09:33:51.883: USER: Disconnected
05/Jan/2011 09:33:51.930: USER: Connection attempt number 3.
05/Jan/2011 09:33:51.946: USER: Connecting...
05/Jan/2011 09:33:51.961: USER: Connecting to address 0x01.
05/Jan/2011 09:33:52.460: LOG: Sent message with service ID StartCommunication
05/Jan/2011 09:33:52.460: LOG: Idle end: 325ms Low end: 350ms High end: 375ms Message Send Time: 375ms
05/Jan/2011 09:33:52.538: USER: Fast init succeeded.
05/Jan/2011 09:33:52.538: LOG: Failed to send message 1 times, message send failed.
05/Jan/2011 09:33:52.601: USER: Disconnected
05/Jan/2011 09:33:52.632: LOG: Closing FTDI device.
05/Jan/2011 09:33:52.679: LOG: Send receive thread now terminated.
Logged
Tony@NefMoto
Administrator
Hero Member
Karma: +132/-4
Offline
Posts: 1389
2001.5 Audi S4 Stage 3
Re: help with log from v1.6.0.0 Flashing sw
« Reply #1 on: January 10, 2011, 07:50:49 PM »
Version 1.6.1.0 should hopefully fix this issue, but I'm not positive.
I will be releasing a new version of 1.6.1.0 tonight that should work for more people if you have already tried it.
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki:
http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter:
http://twitter.com/nefmoto
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
July 24, 2025, 06:28:56 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...